Menu Operation

Activating Security Code

⁄

•You can set the Security Code with a 4 digit number of your choice.

•The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.

1Select Security Code item during Menu mode Select the “SECURITY SET” display.

For how to select menu items, refer to <Menu System> (page 9).

2Enter Security Code mode

Press the Control knob for at least 1 second. When “ENTER” is displayed, “CODE” is also displayed.

3Select the digits to enter

Push the Control knob towards right or left.

4Select the Security Code numbers

Push the Control knob towards up or down.

5Repeat steps 3 and 4, and complete the Security Code.

6Confirm the Security Code

Press the Control knob for at least 3 second. When “RE-ENTER” is displayed, “CODE” is also displayed.

7Do the step 3 through 6 operation, and reenter the Security Code.

“APPROVED” is displayed.

The Security Code function activates.

⁄

•If you enter the wrong Code in steps 3 through 5, repeat from step 3.

•When the Security Code function is activated, “SECURITY SET” changes to “SECURITY CLR”.

•To deactivate the Security Code function, see the next section <Deactivating Security Code>.

8Exit Security Code mode Press the [M.JOG] button.

Entering Security Code

The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.

1Turn the power ON.

2Do the step 3 through 6 operation, and enter the Security Code.

“APPROVED” is displayed.

Deactivating Security Code

Deactivating the Security Code function.

1Select Security Code item during Menu mode Select the “SECURITY CLR” display.

For how to select menu items, refer to <Menu System> (page 9).

2Enter Security Code mode

Press the Control knob for at least 1 second. When “ENTER” is displayed, “CODE” is also displayed.

3Select the digits to enter

Push the Control knob towards right or left.

4Select the Security Code numbers

Push the Control knob towards up or down.

5Repeat steps 3 and 4, and complete the Security Code.

6Press the Control knob for at least 3 second. “CLEAR” is displayed.

The Security Code function deactivates.

7Exit Security Code mode Press the [M.JOG] button.

⁄

•If the entered security code is incorrect, “ERROR” is displayed. Enter a correct security code.

Manual Clock Adjustment

1Select Clock Adjustment item during Menu mode

Select the “CLOCK ADJUST” display.

For how to select menu items, refer to <Menu System> (page 9).

2Enter Clock Adjust mode

Press the Control knob for at least 1 second. The clock display blinks.

3Adjust the time

Push the control knob towards up or down to adjust the hours and right or left to adjust the minutes.

4Exit Clock adjustment mode Press the [M.JOG] button.

10 KMR-330