Kenwood KMR-330 Audio Control, Audio Setup, Speaker Setting, Range, Range, Display, Display, Display, Speaker type, 1Enter Standby, 5Exit Audio Setup mode

General Operation

Audio Control

You can adjust following Audio Control items;

Adjustment Item	Display	Range
Subwoofer level	“SUB-W L”	–15 — +15
Bass Boost	“B.BOOST-L”	“L1”/”L2”/“OFF”
		(The indicator turns on
		according to the setting.)
System Q	“NATURAL”/	Natural/User setting/Rock/
	“USER”/“ROCK”/	Pops/Easy/Top 40/Jazz
	“POPS”/“EASY”/	(The indicator turns on
	“TOP40”/“JAZZ”	according to the setting.)
Bass level	“BASS L”	–8 — +8
Middle level	“MID L”	–8 — +8
Treble level	“TRE L”	–8 — +8
Balance	“BALANCE”	Left 15 — Right 15
Fader	“FADER”	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

⁄

•“USER”: The customized Bass, Middle, and Treble levels are effective. This item is displayed only when the tone quality has been adjusted.

This item disappears when another setting is selected.

•You can set Bass, Middle, and Treble for each source.

1 Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the Control knob.

3Select the Audio item to adjust Press the Control knob.

4Adjust the Audio item Turn the Control knob.

5Exit Audio Control mode Press any button.

Press a button other than the Control knob or 0 button.

Audio Setup

You can set Sound system, such as follows;

Adjustment Item	Display	Range
Low Pass Filter	“LPF SW”	80/120/160/Through Hz
Volume offset	“V-OFFSET”	–8 — ±0 (AUX: -8— +8)

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

1 Select the source to adjust Press the [SRC] button.

2Enter Audio Setup mode

Press the Control knob for at least 1 second.

3Select the Audio Setup item to adjust Press the Control knob.

4Adjust the Audio setup item Turn the Control knob.

5Exit Audio Setup mode

Press the Control knob for at least 1 second.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type as follows;

Speaker type		Display
OFF		“SP SEL OFF”
For 5	& 4 in. speaker	“SP SEL 5/4”
For 6	& 6x9 in. speaker	“SP SEL 6*9/6”
For the OEM speaker		“SP SEL OEM”

1Enter Standby

Press the [SRC] button. Select the “STANDBY” display.

2Enter Speaker Setting mode Press the Control knob.

3Select the Speaker type Turn the Control knob.

4Exit Speaker Setting mode Press the Control knob.

6 KMR-330