Presence play
The surround modes allow you to enjoy the feeling of presence in music. Select the mode according to the source or components
played. For the connections of the surround and/or center speakers, refer to “Connection of speakers”. | 78 |
23
Video, DVD and LD software programs car-
rying the 
mark contain recording of the same Dolby Surround data as those used in movie theaters.
The DOLBY PRO LOGIC surround mode uses the Dolby Surround data and brings into home a similar sound field with full of presence to movie theatres.
To use this mode, connect the surround (and center) speakers.
| In case center speaker is not used |
Center speaker |
|
TV | TV |
Front speaker | Front speaker |
Surround speaker | Surround speaker |
If the left and right speakers are installed apart from each other, the center acoustic image (words, etc.) may vary depending on the listener’s position. The DOLBY 3 STEREO mode provides an improved positioning of the center acoustic image regardless of the listening position.
Use this mode when playing videotape, DVD or LD software
carrying the 
mark.
To use this mode, connect the center speaker.
Center speaker
TV 
Front speaker
It is recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind, at a height of about 1 meter higher than the listener’s ears. Each surround speaker should be installed so that the longer sides are horizontal.