Connecting Wires to Terminals

Fuse (10A)

If no connections are made, do not let the wire come out from the tab.

Connect either to the power control terminal

 

 

when using the optional power amplifier, or to

P.CONT.OUT

Power control/Motor antenna

the antenna control terminal in the vehicle.

 

ANT.

control wire (Blue/White)

 

 

CONT.

 

FM/AM antenna input

Wiring harness (Accessory1)

White/Black

 

To front left

FRONT • L

speaker

 

White

 

Gray/Black

To front right

 

FRONT • R

speaker

 

Gray

 

Green/Black

To rear left

 

REAR • L

speaker

 

Green

 

Ignition key switch

Car fuse box (Main fuse)

+

 

ACC

Ignition wire (Red)

Battery wire (Yellow)

Car fuse box

Ground wire (Black) · (To car chassis)

2CAUTION

Purple/Black

 

 

To rear right

REAR • R

speaker

Purple

 

Battery

2WARNING

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal.

— 13 —

Page 13
Image 13
Kenwood KRC-108S instruction manual Connecting Wires to Terminals, Acc