Kenwood KRC-108S Tuner features

Store the frequency of a station. You can then recall that

station with a single touch of a button.

Select the band/ station that you want to have stored.

Press the button (#1-6) that you want to use for the station, for

at least two seconds.

The button number blinks once in the display to indicate that

the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station.

Station Preset Memory

You can choose between auto seek tuning of receivable

frequencies and manual tuning.

Press the SRC (source) button repeatedly to select the tuner

mode."TUuE" is displayed when the tuner mode has been

selected.

Press the BAND button to select the band.

Each time you press the BAND button, the band switches

between FM1, FM2, FM3, and AM.

Press the AUTO button to switch between auto seek tuning

and manual tuning.

The AUTO indicator lights up only when auto seek tuning is

selected.

•Auto Seek Tuning

Press the ¢button to seek higher frequencies.

Press the 4button to seek lower frequencies.

•Manual Tuning

Press the ¢button to increase the frequency by one step.

Press the 4button to decrease the frequency by one step.

The STEREO indicator lights up when stereo broadcasts are being

received.

NOTE

Tuning

Tuner features

— 8 —

English

KRC-108S

SRC /

PWR OFF

AUTO / AME

BAND /

CRSC

#1~6

AUTO indicator

Frequency

STEREO indicator

Band display

Preset station number

indicator

KRC-108S_U.S 00.12.26 3:58 PM Page 8