English
Installation
■Installation
Firewall or metal support
Accessory4
Accessory2 | |
screw | Metal mounting |
(commerciall | strap |
y available) |
|
NOTE |
|
Bend the tabs of the 
mounting sleeve with
a screwdriver or similar utensil and attach it in place.
■Installing in Japanese-Made Cars
1Refer to the section “Removing the hard rubber frame (P. 15)” and then remove the hard rubber frame.
2Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws.
T | N |
|
|
|
|
|
|
| 8 mm |
| |
|
|
|
| 8mm | |
|
|
|
| MAX. | |
N |
|
|
| MAX. | |
T | T/N |
|
| ||
5 |
| 6 | |||
|
|
| |||
|
| ø5mm |
|
| |
|
|
|
| ø5mm |
T: Toyota cars | Accessory5...for Nissan car |
N: Nissan cars | |
| Accessory6 ...for Toyota car |
|
2CAUTION
• During installation, do not use any screws except for those |
provided. The use of different screws might result in damage to |
the main unit. |
• Damage may occur if a screwdriver or similar tool is used with |
excessive force during the installations. |
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
— 14 —
