Kenwood KRC-308S, KRC-408, KRC-38MR manual 24

English

Troubleshooting Guide

The following messages are displayed when certain problems are occurring in your system. Take the recommended actions.

E-01	No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
	] Load the disc magazine properly.
	No CD in the unit.
	] Insert the CD.
E-02	No disc has been loaded in the disc magazine.
	] Load a disc into the disc magazine.
E-04	No disc has been loaded in the disc magazine.
	] Load a disc into the disc magazine.
	The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
	] Clean the CD and load it correctly.
E-10	Nothing has been recorded on the MD.
	] The next MD will automatically be played.
E-11	No tracks are recorded on the MD, although it has a title.
	] The next MD will automatically be played.
E-30	The faceplate of the slave unit being connected to this unit has been removed.
	] Replace it.
E-77	The unit is malfunctioning for some reason.
	] Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service center.
E-99	Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
	] Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not disappear, consult your
	nearest service center.
E-0d	The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),

stopping all operation.

] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again.

— 24 —