Tuner features (See page 5)

English

Local Seek Function

With the local seek function turned on, auto seek tuning skips stations with relatively poor reception.

Turning Local Seek Function On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the local seek function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "LO.S OFF" or "LO.S ON" in the display, indicating that the local seek function is on or off, respectively.

3Switching settings

Press either the AM button or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

Monaural Reception

When poor stereo reception is experienced, this function will reduce noise and improve listening conditions.

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the monaural reception function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "MONO OFF" or "MONO ON" in the display, indicating that monaural reception is on or off, respectively.

3Switching settings

Press either the AM button or FM button. The display and setting will change.

4Press the MENU button to end the menu mode.

Station Preset Memory

Store the frequency of the station currently being listened to. You can then recall that station with a single touch of a button.

1Select the band / station that you want to have stored.

2Hold down the button (#1-6) that you want to use for the station, for two seconds or more.

The button number blinks once in the display to indicate that the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

NOTE

You can store 6 stations in each of the FM1, FM2, FM3, and AM (MW and LW) bands.

Auto Memory Entry

You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 frequencies can be stored this way.

1Select the band for auto memory entry.

2Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

3Press the ¢ button repeatedly until "A-MEMORY" appears in the display.

Press the 4 button to search in the other direction.

4Hold down either the AM button or FM button for two seconds or more to start auto memory function.

The numbers of the preset station buttons showed in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.

— 12 —