Basic operations of remote control (See page 8) Optional

English

Tuner Mode

Number/ letter entry buttons

Press buttons #1-6 to recall preset stations.

During direct access tuning, use these buttons to input the frequency of the station.

TUNE buttons

Press the 4 button to make decreasing seeks (using the preset tuning mode).

Press the ¢ button to make increasing seeks (using the preset tuning mode).

AM/FM button

Press the AM button to select the MW and LW bands.

Press the FM button to select and switch between FM1, FM2, and FM3 bands.

DIRECT/OK button

Selects the direct access tuning mode, used to input frequencies directly. Press this button again to cancel the mode whilst it is operating.

During Station name preset play mode, selects station.

DNPP button

Enters and cancels the Station Name Preset Play mode.

Tape Mode

T.ADV buttons

Press the 4 button to start play again at the beginning of the current track.

Press the ¢ button to start play at the beginning of the next track.

REW button

Rewinds the tape.

FF button

Fast forwards the tape.

PROG button

Plays the reverse side of the tape. When pressed during fast forwards and rewinds, this button stops the tape and starts playing it.

— 36 —