Kenwood KRC-559R, KRC-659R Disc control mode

PROBLEM	POSSIBLE CAUSE	SOLUTION

The memory is erased when	The battery cable has not been connected to the proper	Connect the cable correctly, referring to the section on
the ignition is turned off.	terminal.	"Connecting Cables to Terminals".

	The ignition and battery cable are incorrectly connected.	Connect the cable correctly, referring to the section on
		"Connecting Cables to Terminals".

The TEL mute function does	The TEL mute cable is not connected properly.	Connect the cable correctly, referring to the section on
not work.		"Connecting Cables to Terminals".

The TEL mute function turns on	The TEL mute cable is touching a metal part of the car.	Pull the TEL mute cable away from the metal part of the car.
even though the TEL mute
cable is not connected.

Disc control mode

PROBLEM

POSSIBLE CAUSE

SOLUTION

The disc control mode cannot be selected.

No cable has been connected to the disc changer input	Connect the cable to the disc changer input terminal on the
terminal on the unit.	unit.

The old/new selection switch of the disc changer is not	Set the old/new selection switch to "O" (old) position.
set properly.

	The specified disc does not	The specified CD is very dirty.	Clean the CD.
	play, but another one plays
	play, but another one plays	The CD is upside-down.	Load the CD with the labelled side up.
	instead.	The CD is upside-down.	Load the CD with the labelled side up.

		The disc is loaded in a different slot from that specified.	Eject the disc magazine and check the number for the
			specified disc.

		The disc is severely scratched.	Try another disc instead.

	The sound skips.	Something is touching the disc changer.	Remove whatever is touching it.

		The CD is scratched or dirty.	If skipping happens at the same place when the car is
			stopped, something is wrong with the CD. Clean the CD.

	The display shows that the	The computer chip in the unit is not functioning normally.	Press the reset button on the unit (see page 4).
	changer is being played, but no
	sound can be heard.

The specified track does not play.

Random play or magazine random play has been selected.

Turn off the random play or magazine random play function.

— 43 —

Contents

© B64-1149-00(EW) English Before use Buttons and Display Basic operations Tuner features 2WARNING To prevent injury and/or fire, take the following precautions: •Make sure not to get your fingers caught between the faceplate and the unit •Be careful not to drop the unit or subject it to strong shock The unit may break or crack because it contains glass parts NOTE Reset button Cleaning the Unit Cleaning the Faceplate Terminals Cleaning the Tape Head DISP TI VOL ADJ Release button 4 FM PROG B NR AM 4 FM DISC– DISC+ D.SCN TUNE + TUNE – REW DISC – DISC + Power Turning on the power: Turning off the power: Switching Modes Switching Modes: Menu System 2Selecting function to set Press the 4 button to search through the functions backward Changing setting for currently displayed function Press either the AM or FM button Selecting Tuning Mode Press the Press the 4 button to search in the other direction 3Switching settings Press either the AM button or FM button to switch the tuning mode Local Seek Function Turning Local Seek Function On/Off: Monaural Reception Station Preset Memory 1Select the band / station that you want to have stored Cancelling Auto Memory Entry During Its Operation: Direct Access Tuning Cancelling Direct Access Tuning: Switching Display for Tuner (non-RDSstation) Switching the Display: Preset station seek with Programme service name You can search for the preset station with Programme Service name 2Once the name is displayed for the station you want to listen to Cancelling mode during input: RDS (Radio Data System) AF (Alternative Frequency) Function The ª indicator lights up when the AF function is turned on Turning AF Function On/Off: 2Press the ¢ button repeatedly until the AF function appears in the display Displaying Frequencies: Traffic Information Function Turning TI function On/Off: Switching to a Different Traffic Information Station: Auto TP Seek Function Turning Auto TP Seek Function On/Off: Presetting Volume for Traffic Information/News Preset the volume level to be used for traffic information and news broadcasts 1Tune into the station for which you want to set the volume 2Adjust the volume to the desired level Future traffic information/news broadcasts are heard at the preset level Programme Type (PTY) Function kinds of programmes 3 Seeking the selected programme type 2 Select the type of programme to be received Playing Cassette Tapes Loading and Playing Cassettes: Playing Cassettes Already Loaded: Listening to the other side: 0button Tape Advance Function Using Dolby B NR (Noise Reduction) Rewinds to the beginning of the current track (or fast Listen to tapes recorded using the Dolby B NR system forwards to the beginning of the next track), continuing tape Set the O-Nswitch to "N". "N"-operationwill be set When a unit that is not equipped with an "N"-operation: •The disc title and track title of the CD text can be displayed disc title has been recorded Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button Release your finger to play the disc at that point Reversing Disc Play: Track / Disc Repeat Function Repeat playing the current track or disc Turning Repeat Play Function On/Off: Track Scan Function Turning Track Scan Function On/Off: Disc Scan Function Turning Disc Scan Function On/Off: Stopping to Listen to the Disc Being Scanned: Random Play Function Play all the tracks on the current disc in random order Magazine Random Play Function Play the tracks on all the discs in the disc changer in random order Switching Display for Discs Switch the display that appears while discs are playing Switching Display for Discs: Presetting Disc Names Store the names of discs to be displayed when played Text Scroll To scroll manually: Manual/Automatic scroll switching: To scroll automatically: Direct Track Search Disc Name Preset Play (DNPP) Direct Disc Search If you have preset the name of a disc that you want to listen Using the remote control, make direct input of the disc to in the disc changer, you can look for it by name and start Audio Control Setting Adjust various parameters of sound quality Table of Audio Control Setting TEL Mute Function Shut down the audio system temporarily whenever an incoming call is received When the telephone rings: Restoring Original Unit Source During Phone Call: Press the SRC button Turning TEL Mute Function Off After Phone Call: Automatic Dimmer Function The display dims when the car's lights are turned on Switching Clock display Turning the Clock Display On/Off: Touch sensor tone Adjusting Time Adjusting Time Automatically: Turning Automatic Time Adjustment On/Off: Adjusting Time Manually: Switching Graphic Display Turning the Graphic Display On/Off: DSI (Disabled System Indicator) Turning Disabled System Indicator On/Off: Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you helping to deter theft Removing Faceplate: Reattaching Faceplate: Replacing the Lithium Battery: All Modes Tuner Mode Tape Mode Disc Control Mode Accessories External viewNumber of items Installation Procedure Connecting Cables to Terminals Connector Function Guide Cable Colour Functions External Power Installation ■Installation ■Removing the hard rubber frame ■Removing the Unit Troubleshooting Guide PROBLEM POSSIBLE CAUSE SOLUTION Disc control mode EJECT ]Load the disc magazine properly No CD in the unit ]Insert the CD NO DISC No disc has been loaded in the disc magazine Specifications Specifications subject to change without notice. FM tuner section FM tuner section Frequency range (50 kHz Space) 87.5 MHz – 108.0 MHz