Cassette player features (See page 6)
A press of the release button results in the faceplate dropping open to the front, thereby exposing the cassette insertion slot. Holding the cassette with the tape exposed to the right, insert it in the slot. The faceplate will show the control panel, and the tape will start playing.
The ¢ indicator lights up when a caseette has been loaded.
2CAUTION
When inserting a cassette make sure the cassette has been completely drawn in before pushing back the faceplate. Failing to do so might deform the tape.
Playing Cassettes Already Loaded:Press the SRC button repeatedly until the tape mode is obtained.
“TAPE” is displayed when the tape mode has been selected. The tape will start playing.
Listening to the other side: |
|
Press the PROG button. |
|
Tape play switches to the other side. | 0button |
Ejecting Cassettes: | |
Press the release button and drop |
|
open the faceplate. |
|
Press the 0 button located near |
|
the cassette insertion slot. |
|
The tape stops playing and the |
|
cassette ejects. |
|
Push back on the right side of the |
|
faceplate with your hand until it |
|
locks. |
|
2CAUTION
•When the faceplate has been dropped open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit.
•Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown.
•Do not use the unit with the faceplate in the open condition. Doing so will cause breakdown.
NOTE
Remove a cassette from the unit when not listening to it for a whilst. If you leave it in the unit too long, the tape may stick to the tape head and cause the unit to malfunction.
Fast Forwarding and Rewinding Cassette TapesFast Forwarding Tapes:Press the FM button.
The tape indicator blinks in the direction of the tape as it is being fast forwarded.
Rewinding Tapes:Press the AM button.
The tape indicator blinks in the direction of the tape as it is being rewound.
Cancelling:Press the PROG button.
Normal tape play returns.
Blank Skip FunctionAutomatically fast forwards to the beginning of the next track when long blank spaces (10 seconds or more) are detected, continuing tape playback. This function is on, when unit is first powered on.
Turning Blank Skip Function On/Off:Press the B.S button to switch the blank skip function on and off.
NOTE
•If the blank space contains much noise, the blank skip function may not work right.
•Sections recorded at low levels may trigger the blank skip function if they last for 10 seconds or more.
Tuner Call FunctionSwitch automatically to the tuner whilst you are rewinding or fast forwarding the tape.
Turning Tuner Call Function On/Off:Press the T.C button to switch the tuner call function on and off.
— 19 —