Troubleshooting Guide

The following messages are displayed when certain problems are occurring in your system. Take the recommended actions.

EJECT

NO DISC

E-04

No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.

]Load the disc magazine properly. No CD in the unit.

]Insert the CD.

No disc has been loaded in the disc magazine.

]Load a disc into the disc magazine.

No disc has been loaded in the disc magazine.

]Load a disc into the disc magazine.

The CD is very dirty. The CD is upside-down. The CD is scratched a lot.

]Clean the CD and load it correctly.

BLANK

NO TRACK

E-77

E-99

HOLD

Nothing has been recorded on the MD.

]The next MD is automatically played back

No tracks are recorded on the MD, although it has a title.

]The next MD is automatically played back.

The unit is malfunctioning for some reason.

]Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service centre.

Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

]Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not disappear, consult your nearest service centre.

The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation.

]Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc starts playing again.

¢If this indicator continues blinking, it is possible that the tape has become jammed or tangled. ]Contact the Kenwood dealer if the tape cassette cannot be ejected.

— 45 —