English

Other features (See page 7)

 

 

 

Function of the KRC-PS959R,859R/C/W

 

TEL Mute Function
Switching preout

 

 

Shut down the audio system temporarily whenever an
Switch the preout between the front and non-fading. When

 

incoming call is received.
you switch to non-fading, you can adjust the volume

 

 

 

 

separately. The factory defalt is front preout.

 

 

NOTE

 

 

 

The function will not work if a cable is not connected to the car

Switching the preout:

 

 

 

 

phone.

1

Hold down the MENU button for one second or more.

 

When the telephone rings:

 

 

"MENU" is displayed and the menu mode is turned on.

 

 

 

 

 

When a call is received, "CALL" is displayed and all the unit

2

 

 

 

 

 

Press the ¢ button repeatedly until the Switching preout

 

 

functions are temporarily interrupted.

 

 

function appears in the displays.

 

Restoring Original Unit Source During Phone Call:

 

 

Press the 4 button to search in the other direction.

 

 

Press the SRC button.

 

 

The function setting is indicated by "SWPRE FRONT" or

 

 

"CALL" disappears from the display, and the volume of the

 

 

"SWPRE N-FAD" in the display, indicating that the current

 

 

original source is restored gradually.

 

 

preout is front or non-fading, respectively.

 

Turning TEL Mute Function Off After Phone Call:

 

 

"SWPRE FRONT" (Front preout)

 

 

 

 

 

Hang the phone up.

 

 

"SWPRE N-FAD" (Non-fading preout)

 

 

 

 

 

 

"CALL" disappears from the display.

3 Switching settings

 

 

 

 

The original source (i.e., the one used before the phone call) is

 

 

Press either the AM button or FM button.

 

 

returned to automatically, and the volume restored gradually.

4

The display and setting will change.

 

 

 

 

 

 

 

 

Press the MENU button to end the menu mode.

 

 

 

Navigation Mute Function

 

NOTE

 

 

 

When the KENWOOD Navigation System is connected, an

 

You cannot use the high-pass filter with non-fading preout.

 

 

 

interruption of the audio guide results in the temporary
Turning non-fading output On/Off :

 

lowering of the audio level.

 

 

Hold down the NF button for one second or more to set the

 

 

 

 

 

 

 

 

NOTE

 

 

 

function ON or OFF.

 

 

 

 

 

 

 

The Navigation mute function cannot be used unless a TEL mute

 

 

"NF ON" is displayed when the non-fading output is set ON.

 

 

 

 

 

 

cable is connected to the KENWOOD Navigation System.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Touch sensor tone

 

 

 

 

 

 

This function produces a beep sound that accompanies button

 

 

 

 

 

 

operation. It can be switched on or off.

 

 

 

 

 

 

Turning the Beep On/Off:

 

 

 

 

 

 

1 Hold down the MENU button for one second or more.

 

 

 

 

 

 

 

"MENU" is displayed and the menu mode is turned on.

 

 

 

 

 

 

 

 

 

— 30 —