Surround play
The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
the 
mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing
video, DVD, or LD software bearing the 
mark.
INPUT MODE INPUT SELECTOR
LISTEN MODE
LSTN M.
LISTEN MODE
INPUT
SELECTOR 
When the DTS signal is input:
(The DTS indicator lights up.) | 27 | ||||
| |||||
|
| 1 | DTS: DTS surround |
| |
|
| ||||
|
|
| 2 | STEREO: Normal stereo playback |
|
|
|
| |||
When the analog signal or the digital signal (except for DOLBY DIGITAL or DTS signal) is input:
1 PRO LOGIC: PRO LOGIC surround (The PRO LOGIC indicator lights up.)
23 STEREO:
3ARENA: DSP surround.
4JAZZ CLUB: DSP surround.
5 THEATER: DSP surround.
6 STADIUM: DSP surround.
7 DISCO: DSP surround.
8 STEREO: Normal stereo playback. Sound is produced from the two front channels only.
•If a Dolby Digital signal having more channels than the maximum number of playback channels available using the receiver’s current settings is input, the DOWNMIX indicator on the front panel lights up and downmixing is performed to match the number of available channels.
3Adjust the volume.
Notes
• Depending on the type of the signal or speaker setting, some listening modes cannot be selected.
Operations
Preparations
•Turn ON related components.
•Complete “Preparing for surround sound” (speaker settings). (
•Use the INPUT SELECTOR to select the component you wish to play back with surround sound.
•Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back. | 9 |
•Noise will be produced when a DTS source is played by selecting the analog input.
1Start playing the video software.
2Press the LISTEN MODE (LSTN M.) key to select the listening mode.
The listening mode settings are stored separately for each input. If the input mode is set to digital auto (“AUTO SOUND” lights), the receiver selects the optimal listening mode automatically based on the type of input signal and the speaker settings.
Each press of the LISTEN MODE (LSTN M.) key switches the setting as listed below.
The listening mode settings are different depending on the type of input signal.
When the DOLBY DIGITAL signal is input:
(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)
1 DOLBY DIGITAL: DOLBY DIGITAL surround
2PRO LOGIC: PRO LOGIC surround (The PRO LOGIC indicator lights up.)
33 STEREO:
4 STEREO: Normal stereo playback
When you select DOLBY DIGITAL
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SP |
| A |
| TI.VOL | L | C | R | FM | AUTO SOUND | DIGITAL |
|
| |
|
|
|
|
| MUTE | LFE |
|
| AM PRO LOGIC S.DIRECT |
|
| |||
|
|
|
|
|
|
| MHz 3 STEREO MONITOR |
|
| |||||
| RDS |
| EON | PTY | SL | S | SR | kHz DOWN MIX DSP |
|
|
| |||
| TP | TA | NEWS |
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listening modes) from a single component, be sure to use a Dolby Digital compatible source component. Connect the Dolby Digital compatible source component's Dolby Digital format digital audio signal to one of the DIGITAL INPUT jacks on the back of the receiver. Connect the normal audio signal correctly to the respective component's AUDIO
jacks.0!@#