Basic remote control operations for other components
(For
The remote control supplied with this receiver (for
30
Low battery warning
Replace all four batteries with new ones when you notice a shortening of the distance from which the remote control will operate. The remote control is designed to retain setup codes in memory while you change batteries.
Registering setup codes for other components
4Repeat steps 2 to 3 to register additional components until all components have been registered.
Note
Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.)
Operating other components
This operation lets you operate the registered components. KENWOOD audio components with system control turn on and off automatically with the receiver via the system control connections.
POWER
Source
Numeric keys 
POWER keys
1Find the setup code of the component to be registered.
• Refer to the setup code lists to find the setup code for the component
to be registered.⁄ Example: To register a DVD made by KENWOOD, you would enter "805".
Input | Component | Maker | Code | Key |
(DVD) | DVD player | KENWOOD | 805, 808 | DVD |
Control Remote
2Hold down the POWER key and press the numeric keys to enter the setup code.
•Example: Press “805” to register a DVD player made by KENWOOD.
•If you push an invalid key, the remote will exit the setup mode.
3Press the source POWER (TV, VCR, DVD, CABLE, DSS)key for more than 2 seconds, and check to see that the component you want to control turns on.
If the component does not react, and there is more than one setup code, enter another setup code and try again.
•6, TUNING 1/¡, or MULTI CONTROL key(s) can also be used instead of the POWER key.
•If the component is already on, pressing the source POWER keys will turn it off.
POWER
Source
POWER keys
RECEIVER 
1Use the input selector keys to select the component you desire.
•Pressing the input selector keys also changes the input selector on the receiver.
•When you operate your registered TV, VCR, DVD player, Cable tuner, or DSS receiver, go to step 2.
•When you operate the CD player, Cassette deck, MD player, or Tuner with system control connection, go to step 3.
2Press the source POWER key.
3Press the operation keys you desire.›
• To return to the receiver operation mode, press the RECEIVER key.
The remote control mode returns to the receiver operation mode when you do not operate for more than 15 seconds.
Note
Be sure to point the remote control at the remote sensor on the receiver when you want to operate KENWOOD components connected by system control cords. Otherwise, point the remote control at the component you want to operate.