DVD 6-channel playback

(VR-506/517/KRF-V6050D/V5050D)

28

Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback.

When you try to play a disc other than Dolby Digital such as DTS CD, no sound is produced or, noise may be heard. To avoid this situation, make sure that you connect the component to the receiver’s DVD/6ch. INPUT jacks through a surround processor which can decode the surround signal you wont to listen to.

Connecting a DVD player which can decode the surround signal itself is also acceptable.

INPUT MODE INPUT SELECTOR

Ambience effects

Convenient functions

MULTI CONTROL

DIMMER

SOUND

SOUND

MULTI

CONTROL

Operations

DVD

 

RC-R0511

RC-R0615/R0617

Preparations

Connect your DVD player to the DVD/6ch jacks of the receiver.

Turn on all other components that will be used.

• Complete “Preparing for surround sound”.

(

1Select “DVD/6ch” as the input source.

If speaker system B is on when “DVD/6ch” is selected as the input source, it switches off and speaker system A turns on automatically.

2Select "6ch INPT" by pressing the INPUT MODE key.

3Start playback of the DVD software.

4Adjust the volume.

It is not possible to adjust the volume level or sound quality (SET UP, SOUND) of the channels separately when the receiver is in the DVD/ 6ch mode. Adjust the volume with the controls of the DVD player.

For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control.

RC-R0511RC-R0615/R0617

Adjusting the sound

You can make further adjustments to the sound while listening to playback in the surround mode.

1Press the SOUND key until the desired item appears in the display.

Each time you press the button, the menu changes as follows: Note that some items are not displayed in certain modes.

1

BASS (low frequency range sound quality adjustment)

¡

2

TREB (high frequency range sound quality adjustment)

¡

3C (center speaker level adjustment)

4SR (right surround speaker level adjustment)

5 SL (left surround speaker level adjustment)

6 SW (subwoofer level adjustment)

7 INPUT (input level adjustment)

)

8 NIGHT (midnight mode on/off)

 

2Use the MULTI CONTROL keys to adjust the setting as desired.

The adjustment item is displayed for approximately 8 seconds.