Kenwood manual 42

42

Caution : Read this page carefully to ensure safe operation.

For other countries

AUDIO section (KRF-V6050D)

Effective power output during STEREO operation
1kHz,10% T.H.D.,at 8 Ω ...........................................	140 W + 140 W

Rated power output during STEREO operation

100 watts per channel minimum RMS, both channels driven, at 8 Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion.(FTC)

Effective power output during SURROUND operation

FRONT (1kHz, 10% T.H.D. at 8 Ω one channel driven)

..............................................................................	140 W + 140 W
CENTER (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................................	140 W
SURROUND (1kHz, 10% T.H.D. at 8 Ω one channel driven)
..............................................................................	140 W + 140 W
Total harmonic distortion .........................	0.050% (1 kHz, 50W, 8 Ω)
Frequency response
CD .............................................	10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM) ........................................................................	74 dB
CD .........................................................................................	90 dB
Input sensitivity / .........................................................impedance	2.5 mV / 27 kΩ
PHONO (MM)
CD .........................................................................	200 mV / 47 kΩ
VIDEO2/MONITOR ...............................................	200 mV / 47 kΩ
DVD/6ch INPUT ...................................................	200 mV / 47 kΩ
Output level / impedance..............................................................	200 mV / 1 kΩ
TAPE REC
VIDEO2/MONITOR .................................................	200 mV / 1 kΩ
PRE OUT (SUBWOOFER) ......................................	1.5 V / 2.2 kΩ
Tone control
BASS ................................................................	±10 dB (at 70 Hz)
TREBLE ..........................................................	±10 dB (at 10 kHz)

AUDIO section (KRF-V5050D)

Effective power output during STEREO operation
(1 kHz, 10%, 8Ω) ..........................................................	140 W + 140 W

Rated power output during STEREO operation

100 watts channel minimum RMS, both channels driven, at 8

Ωfrom 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

Effective power output during SURROUND operation

FRONT (1kHz, 10%	T.H.D. at 8 Ω one channel driven)
..............................................................................		140 W + 140 W
CENTER (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................................		140 W
SURROUND (1kHz, 10% T.H.D. at 8 Ω one channel driven)
..............................................................................		140 W + 140 W
Total harmonic distortion .........................		0.050% (1 kHz, 50W, 8 Ω)
Frequency response
CD .............................................	10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
PHONO (MM) ........................................................................		74 dB
CD, TUNER, AUX, TAPE .....................................................		90 dB
Input sensitivity / .........................................................impedance		2.5 mV / 27 kΩ
PHONO (MM)
CD .........................................................................		200 mV / 47 kΩ
MONITOR IN (VIDEO2/MONITOR) .....................		200 mV / 47 kΩ
DVD/6ch INPUT ...................................................		200 mV / 10 kΩ
Output level / impedance..............................................................		200 mV / 1 kΩ
TAPE REC
MONITOR OUT (VIDEO2/MONITOR) ...................		200 mV / 1 kΩ
PRE OUT (SUBWOOFER) ......................................		1.5 V / 2.2 kΩ
Tone control
BASS ................................................................		±10 dB (at 70 Hz)
TREBLE ..........................................................		±10 dB (at 10 kHz)

Specifications

AUDIO section (KRF-V5550D)

Effective power output during SURROUND operation

(1kHz, 10%, 8Ω) ...........................................................	110 W + 110 W
Rated power output during STEREO operation

80 watts per channel minimum RMS, both channels driven, at 8 Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

Effective power output during SURROUND operation FRONT (1kHz, 10% T.H.D. at 8 Ω one channel driven)

..............................................................................		130 W + 130 W
CENTER (1kHz, 10% T.H.D. at 8 Ω one channel driven)
.............................................................................................		130 W
SURROUND (1kHz, 10% T.H.D. at 8 Ω one channel driven)
..............................................................................		130 W + 130 W
Total harmonic distortion .........................		0.050% (1 kHz, 40W, 8 Ω)
Frequency response
CD .............................................	10 Hz ~ 60 kHz, +0 dB, –3.0 dB
Signal to noise ratio (IHF’66)
CD, TUNER, AUX, TAPE .....................................................		90 dB
Input sensitivity........................................................................./ impedance		200 mV / 47 kΩ
CD
MONITOR IN (VIDEO2/MONITOR) .....................		200 mV / 47 kΩ
Output level / impedance..............................................................		200 mV / 1 kΩ
TAPE REC
MONITOR OUT (VIDEO2/MONITOR) ...................		200 mV / 1 kΩ
Tone control
BASS ................................................................		±10 dB (at 70 Hz)
TREBLE ..........................................................		±10 dB (at 10 kHz)

DIGITAL AUDIO section

Sampling frequency	...................... 32 kHz, 44.1 kHz, 48 kHz, 96kHz
Input level / impedance / wave length
Optical ...........................	(–15 dBm ~ –21 dBm), 660 nm ±30nm
Coaxial .................................................................	0.5 Vp-p / 75 Ω

VIDEO section

VIDEO inputs / outputs
VIDEO (composite) ................................................	1 Vp-p / 75 Ω
S VIDEO inputs / outputs (KRF-V6050D).................................	1 Vp-p / 75 Ω
S VIDEO (luminance signal)
S VIDEO (chrominance signal) ......................	0.286 Vp-p / 75 Ω

FM tuner section

Tuning frequency range ................................... 87.5 MHz ~ 108 MHz

Usable sensitivity (MONO)

................ 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)
50dB quieting...................................................sensitivity	28 µV (75 Ω)/ 40.2 dBf
STEREO
Total harmonic distortion (1 kHz)
MONO ........................................................	0.5% (71.2 dBf input)
STEREO ....................................................	0.7% (71.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz DEV.)
MONO .......................................................	75 dB (71.2 dBf input)
STEREO ...................................................	68 dB (71.2 dBf input)
Stereo separation (1 kHz) ..........................................................	40 dB
Selectivity (±400 kHz) .................................................................	50 dB
Frequency response .................	(30 Hz ~ 15kHz), +0.5 dB, –3.0 dB

AM tuner section

Tuning frequency range
9 kHz step ...................................................	531 kHz ~ 1,602 kHz
10 kHz step .................................................	530 kHz ~ 1,610 kHz
Usable sensitivity .................................................	16 µV / (600 µV/m)
Signal to noise ratio (30% mod. 1 mV input) ...........................	50 dB

Information Additional

Notes

1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.

2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).