Speaker settings

Speaker setup ("SP SETUP")

This sets up the speakers according to the speaker system in use. Speaker setup is required every time the speaker system is changed.

œSee <Getting into the setup mode> (&) and select "SP SETUP".

∑Use [MULTI CONTROL 5/∞] to select the subwoofer setting.

Speaker

Display

Selection

Subwoofer

"SUBW ON"

With Subwoofer

"SUBW OFF"

Without Subwoofer

 

éPress [SETUP].

®Repeat steps ∑– éfor the rest of the speaker setting.

Speaker

Display

Selection

Front speaker

"FRNT LRG"

Large size front speaker

"FRNT NML"

Average size front speaker

 

 

"CNTR NML"

Average size center speaker

Center speaker

"CNTR LRG"

Large size center speaker

 

"CNTR OFF"

No center speaker is connected.

 

"SURR NML"

Average size surround speaker

Surround speaker

"SURR LRG"

Large size surround speaker

 

"SURR OFF"

No surround speaker is connected.

Subwoofer re-mix*

"RMX ON"

Subwoofer re-mix is on.

"RMX OFF"

Subwoofer re-mix is off.

 

*The function for adding the bass of other channels to the subwoofer channel according to the speaker setup.

†Go to the next setting, "TEST TONE".

•If you wish to exit the setup mode, see <To exit the setup mode>

&.

Notes:

•When "SUBW OFF" is selected, the front speakers are automatically set to "FRNT LRG".

•For "FRNT LRG" selection, no sound will be heard from subwoofer even it is set to ON. However, if you select "RMX ON", you will be able to hear sound from the subwoofer.

•When in STEREO mode, the sound goes directly to front speakers.

•If "FRNT NML" is selected, "CNTR LRG" cannot be selected.

•If "CNTR NML" or "CNTR OFF" is selected, "SURR LRG" cannot be selected.

Adjusting the speaker level ("TEST TONE")

From your usual listening position, adjust the volume output of each speaker. The output level from each speaker should be the same.

œSee <Getting into the setup mode> (&) and select "TEST TONE".

∑Use [MULTI CONTROL 5/∞] to select either "AUTO" or "MANUAL".

Display

Selection

"AUTO"

The test tone is heard from the speakers one after another with

2 seconds each.

 

"MANUAL"

The test tone is heard from the speaker you have selected.

éPress [SETUP].

®Adjust the output level.

If you select "AUTO":

When you hear the test tone from the speaker which you wish to adjust, use [MULTI CONTROL 5/∞] and adjust the volume of the test tone. When you finish adjusting, press [SETUP].

If you select "MANUAL":

Use [MULTI CONTROL 5/∞] to adjust the volume of the test tone and press [SETUP]. You will hear the test tone from the next speaker.

†Go to the next setting, "DISTANCE".

•If you wish to exit the setup mode, see <To exit the setup mode>

&.

18 KRF-V5300D