Kenwood KRF-V5300D Normal Playback, Preparing for playback, Turning on the power, Selecting the input mode (main unit only), Setting the speaker status (main unit only)

Normal Playback

Preparing for playback

Some preparatory steps are needed before starting playback.

INPUT SELECTOR

	LISTEN MODE	INPUT MODE
	SPEAKERS	RECEIVER
	ON/OFF	RECEIVER
	ON/OFF

LISTEN MODE

Input source keys

Turning on the power

œTurn on the power to the related components.

∑Press [RECEIVER] to turn on the receiver unit.

Selecting the input mode (main unit only)

If you have selected a component connected to the DIGITAL IN jacks (CD/DVD, VIDEO2 and DVD/6CH INPUT), make sure that the input mode setting is correct for the type of audio signal to be used.

œUse [INPUT SELECTOR] to select "CD/DVD", "VIDEO2", or "DVD/6CH".

∑Press [INPUT MODE].

Each press switches the setting as follows:


Display		Setting	Input signal
"F-AUTO"*1		Full Auto	Digital input or Analog input
"D-MANUAL"		Digital Manual	Digital input
"6CH INPT"23		6ch input	DVD/6CH input
"ANALOG"*3		Analog input	Analog input
*1	Factory setting.
*2	"6CH INPT" setting can be switched only when the input selector
	is set to "DVD/6CH".
*3	This cannot be selected when in DTS play mode.

Full Auto ("F-AUTO"):

The unit detects the digital or analog input signal automatically. The unit selects the input mode and listen mode automatically during playback to match the type of input signal (Dolby Digital, DTS or PCM) and the speaker setting. Normally use Full Auto.

In this mode, "AUTO DETECT" indicator lights up. "DIGITAL" indicator also lights up when digital input signal comes in.

"AUTO DETECT" and "DIGITAL" indicators

Setting the speaker status (main unit only)

Press [SPEAKERS ON/OFF] to switch the speaker on or off.

The speaker indicator lights up when set to on.

Note:

•Set Speakers to OFF for stereo playback. When Speakers is set to ON again, the listen mode remains in stereo if the input signal is digital.

Digital Manual ("D-MANUAL"):

Some discs produce sound skipping even when "F- AUTO" is set. Select "D-MANUAL" with such a disc. Digital Manual accelerates the input signal processing by fixing the listen mode and therefore minimizes sound skipping during disc playback.

If audio reproduction stops in the middle due to change in the input signal, press [LISTEN MODE].

6ch input ("6CH INPT"):

Select this setting to play the DVD player connected to DVD/6CH IN jacks.

Analog input ("ANALOG"):

Select this setting to play analog signals from a cassette deck, VCR, or record player.

Note:

•If [INPUT MODE] is pressed too quickly, sound may not be produced. Press [INPUT MODE] again.

20 KRF-V5300D