Preparing the remote control

Loading batteries

œRemove the cover.

∑Insert batteries.

Operation

When the Standby indicator is lit, the power turns ON when you press [ RECEIVER] on the remote control unit. When the power comes ON, press the key you want to operate.

Operating range (Approx.)

Standby indicator

Remote sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Insert two (R03) batteries following the polarity indications.

éClose the cover.

Infrared ray system

•When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys.

Notes:

1.The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks.

2.When the remote-controllable distance gets shorter than before, replace both batteries with new ones.

3.Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction.

In such a case, change the location of the system installation to prevent malfunction.

English 7