Chapter Four: Setting Up Multiple Zones

You can operate equipment from two different zones using your Kenwood PowerTouch. To do so:

1.Make sure you have identified all the connected devices to your PowerTouch. For more information on identi- fying devices, see “Identifying Devices For PowerTouch Control” on page 40 of this manual.

2.Touch the (SETUP) on the Quick Access menu to access the Setup menu:

50

ZonesMultiple

3. Touch

to access multi-zone commands:

 

 

 

 

4. Touch the

to highlight it.

Setting Up the PowerTouch

5. Touch

for select Zone A or touch

for

select Zone B. The selected zone will be highlighted.

Your PowerTouch is now set up to operate devices in multiple zones. Which zone it controls depends on which zone you select. For more information on selecting zones, see “How Do I Switch Control Modes?” on page 91 of the Users’ Guide.

If you plan on using the KRF-X9995D in a Dual-Zone ap- plication, you must use the composite video connections in addition to any S-Video connections. Only video sources connected with composite connectors can be viewed in the second zone (Zone B).

You must use the analog audio cable connections. (Digital inputs are not sent to Zone B.)