Kenwood KRF-X9995D Chapter Five: Specifications, NOTE:, KRF-X9995D(for U.K.), Read this page carefully to ensure safe operation

Specifications

NOTE: Do not use contact cleaning agents because they could cause a malfunction. Be especially careful not to use contact cleaning agents containing oil, since they may deform the plastic components.

KRF-X9995D (for U.K.)

	Audio Section
	Rated Output Power during stereo operation
	1 kHz, 0.03% T.H.D. , 6Ω (DIN/IEC) ...........			140W + 140 W
	20 Hz ~ 20 kHz, 0.03% T.H.D. , 6Ω (IEC)
	..........................................................................			130W + 130 W
	Effective Output Power during surround operation
	1 kHz, 0.06% T.H.D. at 6 Ω		, all channel driven
	(Front, Center, Surround)		..................................	130 W ⋅	5
	Total Harmonic Distortion .............		0.005 % (1 kHz, 65 W, 6 Ω		)
	Frequency Response (IHF’66)
54	Line (CD1, MD/TAPE, CD2/TAPE2 MONITOR, CD-R,
	VIDEO 1 - 4, DVD/6CH.) .........		7 Hz ~ 100 kHz, 0 dB, -3 dB
	Signal to Noise Ratio (IHF ‘66)
	PHONO (MM) ...............................................................			76 dB
	CD1 ..................................................................................			98 dB
	Input Sensitivity / Impedance
	PHONO (MM) ................................................			4.0 mV / 47 kΩ
	CD1 .................................................................			300 mV / 47 kΩ
	DVD/6CH. .......................................................			300 mV / 47 kΩ
	Output Level / Impedance
	TAPE REC .....................................................			300 mV / 2.2 k Ω
	PRE OUT (Front, Center, Surround, Surround back)
	................................................................................			1 V / 470 Ω
	PRE OUT (Subwoofer)	...................................		1.8 V / 470 Ω
	Tone Control
	Bass ............................................................			+ 7 dB (at 100 Hz)
	Treble .........................................................			+ 7 dB (at 10 kHz)
	Loudness Control Volume at -30 dB level
	.............................................		+6 dB (100 Hz), +3 dB (10 kHz)
	Digital Audio Section
	Sampling Frequency .............	32 kHz, 44.1 kHz, 48 kHz, 96 kHz
	Input Level / Impedance / Wavelength
	Optical ........................	-15 dBm ~ -21 dBm, 660 nm +30 nm
	Coaxial ............................................................			0.5 Vp-p / 75 Ω

Chapter Five: Specifications

Read this page carefully to ensure safe operation.

Output Level / Impedance / Wavelength
Optical ........................	-15 dBm ~ -21 dBm, 660 nm ±30 nm
Coaxial ............................................................	0.5 Vp-p / 75 Ω

Video Section

Video Inputs / Outputs		Vp-p / 75 Ω
Video (composite) .............................................	1
S Video ( luminance signal) ..............................	1	Vp-p / 75	Ω
(chrominance signal) ..................	0.286	Vp-p / 75	Ω
Component (luminance signal) .......................	1	Vp-p / 75	Ω
(PB/PR-signal) .............................	±0.350 Vp-p / 75		Ω

FM Tuner Section

Tuning Frequency Range ...........................			87.5 MHz ~ 108 MHz
Usable Sensitivity (DIN at 75 Ω )
Mono ..................	1.3 ∝	V/ 13.2 dBf (40 kHz dev., S/N 26 dB)
Stereo ................	35.1 ∝	V/ 42.1 dBf (46 kHz dev., S/N 46 dB)
Total Harmonic Distortion (DIN at 1 kHz)
Mono ...................................................			0.2 % (71.2 dBf input)
Stereo ...................................................			0.8 % (71.2 dBf input)
Signal to Noise Ratio (DIN weighted, 1kHz)
Mono .............................		65 dB (40 kHz dev., 71.2 dBf input)
Stereo .............................		60 dB (40 kHz dev., 71.2 dBf input)
Stereo Separation (DIN at 1 kHz)			..................................... 36 dB
Selectivity (DIN ±300 kHz)		...............................................	64 dB
Frequency Response ................		30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB

AM Tuner Section

Tuning Frequency Range ...........................	531 kHz ~ 1,602 kHz
Usable Sensitivity (30 % mod., S/N 20 dB)
...........................................................................	16 ∝ V / (500 ∝ V/m)
Signal to Noise Ratio (30 % mod., 1 mV input) ..............		50 dB

Relay and IR In/Out Section

Relay Control Terminal
Maximum Output Current ............................................	20 mA
Operating Voltage ..............................................................	12 V
Output Impedance ..........................................................	470 Ω

IR Receiver In Terminal

Maximum Output Current ............................................

20 mA

Operating Voltage ..............................................................

12 V

Output Impedance ..........................................................

470 Ω

IR Out LCD Remote Terminal

Maximum Output Current ............................................

20 mA

Operating Voltage ................................................................

5 V

Output Impedance ..........................................................

470 Ω

SHAPE OF PLUG TO BE CONNECTED:

IR Receiver In and IR Out

DVD Control

LCD Remote

Stereo mini plug

Mono mini plug

Sleeve

Sleeve

Tip

Tip

Ring

IR IN/OUT SPECIFICATION:

Terminal

IR Out LCD

IR Receiver In

Remote

To Tip

Signal

Signal

To Ring

Ground

To Sleeve

+12V

Ground

RELAY CONTROL SPECIFICATION:

status

When a specific

button on one of

Power

Power

PowerTouch’s

Off

On

screen is pressed.

To Tip

0V

0V

+12V

To Ring

0V

+12V

To Sleeve

Ground

Ground

Ground