Warning
Take the following precautions to prevent fire and avoid personal injury:
•To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside the unit.
•If the unit emits smoke or strange smells, turn the power off immediately and consult your Kenwood dealer.
•Do not drop the unit or subject it to strong shocks.
•If the LCD display becomes damaged or broken, do not touch the liquid crystal fluid. The fluid may be dangerous to your health or even fatal. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water.
Caution
Take the following precautions to keep the unit in proper working order:
•Be sure the unit is connected to a 12V DC power supply with a negative ground connection.
•Do not open the unit.
•Do not install the unit where it will be exposed to high levels of humidity, moisture, or dust.
•When replacing a fuse, use only a new one with the proper rating. Using a fuse with the wrong rating may cause the unit to malfunction.
•To prevent a short circuit when replacing a fuse, first disconnect the wiring harness.
•When drilling holes to mount the unit, make sure not to damage wiring or other systems on the other side.
Note
If the unit doesn’t seem to be working properly:
•Turn the unit’s power off, wait 5 – 10 seconds, then turn the power on again.
•If the unit still
If the problem persists, consult your Kenwood dealer.
FCC Warning
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this
instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications if it is not installed and used in accor- dance with these instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for help
Cleaning the unit
If the unit becomes dirty, turn its power off and wipe it clean with a soft dry cloth.
Do not use hard cloths or paint thinner, alcohol, or other volatile solvents to clean the unit. These may cause damage or remove indicator characters.
Warning
Do not operate the unit in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.
4
Here2Anywhere Instruction Manual
Here2Anywhere Instruction Manual
5
