Hands Free Unit Control
Calling by Voice Recognition
Calls by recognizing the registered voice.
⁄
•In order to perform voice recognition, voice must be registered in the Phonebook data. See <Voice Registration> (page 54). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc.) of Phonebook data, a key word voice must be registered. See <Key Word Voice Registration> (page 54).
1Display the Voice Recognition screen
2Utter the voice registered in the PhoneBook
1
2
Utter within 2 seconds after the Beep.
1Displays the recognized phone number or address.
2Cancels voice recognition.
If the voice recognition is succeeded and there is only one phone number found:
If you hear another Beep sound:
Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number.
Make a call.
⁄
•If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see <Key Word Voice Registration> (page 54).
If there are more than one phone numbers registered under the same name, go to step 3.
3Select a Phone number category
4
6 |
| 7 |
5
8
4Calls the displayed phone number.
5Creates an SMS to the displayed address. See <SMS (Short Message Service)> (page 56).
6Selects the Phone number category.
7 Scrolls the phone number.
8 Returns to the previous screen.
4Make a call
⁄
•A message is displayed if the voice is not recognized. Read the message for the further operation.
3
Make a call.
3Displays the phonebook list.
52