Operating Instructions
2.2Rear Panel
AC Power Mains: 220 to 240 V; 50 / 60 Hz
RF IN: For connection to cable from outdoor terrestrial antenna.
RF OUT: For connection to your TV antenna IN or Video Recorder RF IN.
VIDEO: Composite video output for connection to TV, Video Recorder or other A/V Receiver.
AUDIO: Two sets of stereo audio outputs for connection to TV, Video Recorder or other A/V Receiver.
YPbPr: Y/Pb/Pr component video for connection to high definition display.
RGB (15pin D): R/G/B/HS/VS video for connection to high definition display.
COAXIAL: Digital Audio output by coaxial for connection to AV processor.
OPTICAL: Digital Audio output by optical for connection to AV processor.
HDMI: Digital video and audio output for connection to high definition display.
2.3Box Contents
The box that contains your digital receiver should also contain the following items: Remote Controller and batteries (AA Size)
RCA video cables (one white / red, and the other cable red / green / blue) RF cable
User’s Manual with Warranty Information
3 The Remote Controller
3.1Preparing the Remote Controller
|
| 2 x “AA” |
1 | 2 | 3 |
1). Remove the cover of the battery compartment (on the back of the handset) by pushing the tab back and then lifting.
2)Insert 2 AA (1.5 V) batteries according to the + and – markings indicated inside the battery compartment.
3)Replace the cover.
Test the remote controller by pressing any key and check if the
5