Operating Instructions
RGB Connection (D)
Connect the RGB 15pin D socket to your display device. (Refer to D)
Check the display video specifications, many displays cannot show 50Hz TV formats that the STB outputs.
Note: RGB Cable is not supplied.
Note: There is no RGB output signal when component video (YPbPr) is connected.
VIDEO and S-VIDEO (E)
Connect the VIDEO output socket on your digital receiver to your TV’s video input socket.
Alternatively, connect the
Note: The cable is not supplied.
Note: VIDEO or
they are not being used with a display. When an HD connection is made to the digital receiver, there is no OSD on the VIDEO or
Audio Connections
DIGITAL AUDIO (F)
If the display device is equipped with Dolby Digital audio and PCM audio decoding capability, connect the DIGITAL AUDIO output of the digital receiver to the display device’s Digital Audio input using either the OPTICAL or COAXIAL socket. (Refer to F) Alternatively, connect the DIGITAL AUDIO output to an A/V receiver with Dolby Digital decoding and PCM decoding capability. Note: The cable is not supplied.
Analogue Audio (G)
Connect the L & R AUDIO output RCA sockets on the digital receiver to the stereo L & R Audio inputs of the display device and/or A/V receiver. (Not required with HDMI).
(Refer to G). Please use the RCA sockets associated with the video format (HD or SD) that is connected to the display.
(F) DIGITAL AUDIO Connection
(G) Analogue Audio Connection
8