Operating Instructions
6.4Power Saving Setup
Automatic Off Timer function requires a time to be set for the automatic shutdown of the digital receiver. The time which is set is the period from the last received command sent to the receiver until when the digital receiver will automatically go into the standby mode. The default setting is 6 hours. The setting can be changed to 4 or 8 hours or OFF. Select OFF if digital receiver is connected to a VCR or DVD recorder as a tuner.
6.5Tuning Menu Signal Display
The signal strength and signal quality are shown as separate bars. For the digital receiver to function correctly, both these bars need to be displayed in green colour. If either of the bars is displayed in the orange colour, there may be video and audio reception problems (see Troubleshooting). If either of the bars is displayed in red colour, there is a problem with the reception of the digital signal and the antenna and connection to the digital receiver
need to be checked by a qualified antenna installer. See Troubleshooting on page 22.
Channel Installation
When the receiver is initially set up, the channel tuning is initiated by selecting the “Auto Channel Search” function.
Auto Channel Search
Auto Channel Search provides the easiest way to conduct a channel search. It does not require you to enter any other information. This function is strongly recommended for regular users.
However, the user should be aware that all existing channels will be removed as soon as you confirm start of auto scan.
In the Auto Channel Search OSD, all channels found will be listed. The channel search may take a few minutes.
If you exit an auto scan during the scan process, some channels may not be available to you.
17
