Kenwood LZ-702W Adjusting the Screen Control, [3], [2], [3], [2], [3], [2], [3], [2], [3], [2], Item, "BRT, "TIN, "COL, "BLK, Item, Touch, "CONT, Touch, [7On], [7Off], Setting

Operations

Adjusting the Screen Control

You can adjust the picture quality and Auto dimmer control of the monitor.1Enter the Screen Control mode Press the [SCRN] button.2Adjusting the Picture Quality

Each time you touch the button, the setting alternates between the settings shown in the table below.

Item	Touch	Setting
"BRT"	[3]	Brighter screen
	[2]	Darker screen
"TIN"	[3]	Stronger red level
	[2]	Stronger green level
"COL"	[3]	Deeper color
	[2]	Paler color
"CONT"	[3]	Stronger contrast
	[2]	Less contrast
"BLK"	[3]	Less black level
	[2]	Stronger black level
Auto Dimmer
Item	Touch	Setting
"Auto DIM"	[7On]	When it gets dark, the brightness of
		display lowers automatically.
	[7Off]	The display doesn't dim.

•The "BRT" can be adjusted when "Auto DIM" is set to "Off".

•The "TIN" can be adjusted when NTSC video signal is input.

•The "TIN" and "COL" cannot be adjusted for the navigation picture (RGB) or the control screen.

3Exit the Screen Control mode Touch the [OK] button.

•Separate picture quality settings can be stored for the video, control screens and navigation picture.

•The Screen Control is displayed only when you have applied the parking brake.

•If you make no operation for 15 seconds, this mode is automatically canceled.

6 English