Kenwood LZ-702W Setting the NAV input, Display the AV-IN1input, Setting the AV-IN2input, Setting the Rear view camera, Switching the Screen

Setup Menu

=[MENU] = [System Setup]

«

«

Setting the NAV input

Setup input and switch method of the navigation picture.

"NAV"

Touch	Setting
[7RGB]	It becomes the RGB mode setting. Operate the
	[V.SEL] button when the image from the navigation
	unit connected to "TO NAVIGATION" terminal is
	shown on the monitor.
[7AV-IN1]	It becomes the AV-IN1 mode setting. Operate the
	[V.SEL] button when the image from the navigation
	unit connected to "AV1 INPUT" terminal is shown
	on the monitor.
[7Off]	It becomes the Off mode setting. Use this setting
	when there’s nothing connected to the navigation
	unit.

Display the AV-IN1 input

Setting status of "AV1 INPUT" terminal is displayed."AV-IN1"

Display	Setting
"Video 1"	Video 1 mode is selected.
"NAV"	Navigation mode is selected.

Setting the AV-IN2 input

Setup switch method of the picture input to "AV2 INPUT" terminal."AV-IN2"

Touch	Setting
[7Video 2]	It becomes the video mode setting. Operate the
	[V.SEL] button when the image from the device
	connected to "AV2 INPUT" terminal is shown on
	the monitor.
[7R-Cam]	It becomes the Rear view camera mode setting. refer
	to <Setting the Rear view camera> (page 8).
[7Off]	It becomes the Off mode setting. Use this setting
	when there’s nothing connected to the "AV2 INPUT"
	terminal.

Setting the Rear view camera

Setting the display when this device is switched to internal "AV2 INPUT" terminal input source.

1Touch the [R-Cam] button of "AV-IN2".2Setting the Rear view camera.

Item	Touch	Setting
"Reverse"	[7On]	Switches to the rear view camera video
		display when engaging the shift knob of car
		to "Reverse".
	[7Off]	Switches to the rear view camera video
		display when engaging the shift knob of car
		to "Reverse" and then pressing the [V.SEL]
		switch several times.
"Mirror"	[7On]	The image which appeares in the camera is
		turned left-side right and displayed.
	[7Off]	The image which appeares in the camera is
		displayed as it is.

Switching the Screen

"SYSTEM1"

Touch	Setting
[3]	Displays the System Setup-2.
[Return]	Return to the setup menu.

8 English