ADJUSTMENT
NX-800
44

Controls

Panel Test Mode

Test mode operation features

This transceiver has a test mode.
To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily.
Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.

Key operation

Key
“FNC” not appears on the sub LCD display
Function Display
[] / [ ]Test CH up/down Channel No.
[] / [ ]Volume up/down -
[ ] Push:Squelch level up Squelch level
Hold: Squelch off
Squelch off: icon appears
Wide : “w”
[ ] Wide/Narrow/Very narrow Narrow : “n”
Very narrow : “v”
[ ]
Shift to panel tuning mode
-
[ ] Function on FNC” appears on the
sub LCD display
[ ] MSK 1200bps and 2400bps
2400bps : icon appears
[ ] Test signaling CH up Signaling No.
Key
“FNC” not appears
Function Display
Microphone key
[PTT] Transmit -
[0] to [9] Use as the DTMF keypad.
and If a key is pressed during
[A] to [D], transmission, the DTMF -
[#], [*]corresponding to the key
that was presses is sent.
Key
“FNC” appears on the sub LCD display
Function Display
[]- -
[ ] Analog/NXDN Analog: “A”
NXDN: “N”
[] / [ ]Function off -
[]- -
[ ] LCD all lights LCD all point appears
[ ]
High power/Low power
Low: icon appears
[ ] Function off -
[ ] Compander on/off
On: icon appears
[ ] Beat shift on/off
On: icon appears
Microphone key
[PTT] Transmit
[0] to [9]
and Function off -
[A] to [D],
[#], [*]

• LED indicator

Red LED Lights during transmission.
Green LED Lights when there is carrier.

• Sub LCD indicator

“FNC” Appears at function on.

• LCD display in panel test mode

KMC-36ModularMIC jackKeypad[HOOK]Channel Up/Down key[PTT]Power switchVolume Up/Down keyProgrammable function keys
An SQ5 1- 1Channel No.An : Analog narrow modeAw : Analog wide modeNn : NXDN narrow modeNv : NXDN very narrow modeSub LCDdisplay+25Signaling No.Main LCD displaySquelch level(Analog mode only)Temperature