Remote control operation
How to operate
Operation range
Remote control sensor on the Subwoofer
6 m
30° | 30° |
| POWER | 1 |
|
| |
2 | MUSIC/CINEMA | 4 |
| VOLUME | |
3 | PHASE |
|
|
| |
| REMOTE CONTROL UNIT |
|
Infrared ray system
Plug in the power supply plug of the Subwoofer to the AC outlet and press the POWER switch on the Subwoofer to turn ON.
When power is ON : Remote control operation is immediately available.
In Standby mode : First press the POWER key of the re- mote control unit to ON, then press the desired key.
1POWER key
Press to switch the power ON/STANDBY when the POWER switch of the Subwoofer set to ON.
2MUSIC/CINEMA select key | 0 |
This key has the same function as the MODE key on the | |
Subwoofer. |
|
When MUSIC indicator lights | music mode |
When CINEMA indicator lights | movie mode |
3 PHASE select key | 0 |
This key has the same function as the PHASE select key on | |
the Subwoofer. |
|
When NORMAL indicator lights | Normal phase |
When REVERSE indicator lights | Reverse phase |
4 VOLUME control keys | 0 |
÷This keys have the same function as the VOLUME CON- TROL knob on the Subwoofer.
21
FRANÇAIS DEUTSCH NEDERLANDS
Loading batteries
| 1. Remove the back cover. | 2. Insert batteries. | 3. Close the back cover. |
Open by pushing the position | Insert two R03 |
marked with the arrow. | according to the polarity indication. |
| 1. The batteries initially supplied are intended for use in checking the remote control operations, so their service life may be shorter | |
Notes | than usual. When the remote controllable distance shortens or remote control becomes impossible, replace both of the batteries | |
with new ones. | ||
|
2.Malfunction may occur if direct sunlight or the light of a highfrequency lighting fluorescent lamp enters the remote control light sensor. In such a case, change the system installation position to prevent the malfunction.
