Kenwood TH-K2AT, K2E, K2ET manual 39

TH-K2AT/K2E/K2ET

ADJUSTMENT

	Item	Condition	Measurement				Adjustment		Specifications/
			Test equipment	Unit	Terminal	Unit	Parts	Method	Remarks
		6) LCD display: P7H,	Power meter	TX-RX	ANT		Encoder	Write
	Mid power	Frequency: 145.995MHz	Am meter	(A/3)			[MENU]
		PTT: ON
		Switch to Adjustment mode
		and carryout the operations
		for adjustment item H.
		(Refer to page 30)
		7)LCD display: P7L,					Encoder	Write	0.5W ±0.05W
		Frequency: 144.000MHz					[MENU]		0.8A or less
		PTT: ON
		8)LCD display: P7C,					Encoder	Write
	Low power	Frequency: 145.000MHz					[MENU]
		PTT: ON
		9)LCD display: P7H,					Encoder	Write
		Frequency: 145.995MHz					[MENU]
		PTT: ON
2.TX power		Connect the optional PG-2W	DC power supply	TX-RX	DC IN
	Write (DC IN	DC cable to the power supply.	DVM	(A/3)
	terminal: 13.8V)	DC IN terminal voltage: 13.8V
		Switch to Adjustment mode	Power meter		ANT
		and carry out the operations	Am meter
		for adjustment item I.
		(Refer to page 31)
		1)LCD display: P13L,					Encoder	Write	5.0W - 5.1W
		Frequency: 144.000MHz					[MENU]		2.0A or less
		PTT: ON
		2)LCD display: P13C,					Encoder	Write
High power		Frequency: 145.000MHz					[MENU]
		PTT: ON
		3)LCD display: P13H,					Encoder	Write
		Frequency: 145.995MHz					[MENU]
		PTT: ON
		Switch to Adjustment mode
		and carry out the operations
		for adjustment item J.
		(Refer to page 31)
		4)LCD display: P13L,					Encoder	Write	1.5W ±0.05W
		Frequency: 144.000MHz					[MENU]		1.4A or less
		PTT: ON
		5)LCD display: P13C,					Encoder	Write
	Mid power	Frequency: 145.000MHz					[MENU]
		PTT: ON
		6)LCD display: P13H,					Encoder	Write
		Frequency: 145.995MHz					[MENU]
		PTT: ON
		Switch to Adjustment mode
		and carry out the operations
		for adjustment item K.
		(Refer to page 32)
		7) LCD display: P13L,					Encoder	Write	0.5W ±0.05W
Low power		Frequency: 144.000MHz					[MENU]		0.8A or less
		PTT: ON

39