Kenwood TH-K2AT, K2E, K2ET manual 41

TH-K2AT/K2E/K2ET

ADJUSTMENT

Item	Condition	Measurement				Adjustment		Specifications/
		Test equipment	Unit	Terminal	Unit	Parts	Method	Remarks
	1)Frequency: 145.000MHz	Linear detector	TX-RX	ANT		VR5	4.2kHz	±0.1kHz
	(E, E3)	AG	(A/3)	MIC			According to the
	Frequency: 146.000MHz	Oscilloscope					larger +, –.
	(K, K2, M, M2)
	PTT: O N
6.MIC	MIC terminal input						Change the AG	4mV - 12mV
sensitivity	AG: 1kHz						output level to
Check	Detector: P-P/2						obtain 3kHz
	HPF: OFF						deviation.
	LPF: 15kHz
	De-emphasis: OFF
	TX power: Low
	1)Frequency: 145.000MHz
	(E, E3)
	Frequency: 146.000MHz
	(K, K2, M, M2)
	PTT: ON
7.Tone	Switch to Adjustment mode	Linear detector		ANT
deviation	and carry out the operations
	for adjustment item M.
	(Refer to page 33)
	Detector: P-P/2
	HPF: OFF
	LPF: 3kHz
	De-emphasis: OFF
	TX power: Low
	1)LCD display: DVL,					Encoder	Write	0.8kHz ±50Hz
	Frequency: 144.000MHz					[MENU]
	PTT: ON
	2)LCD display: DVC,					Encoder	Write
	Frequency: 145.000MHz					[MENU]
	PTT: ON
	3)LCD display: DVH,					Encoder	Write
	Frequency: 145.990MHz					[MENU]
	PTT: ON
8.DCS	Switch to Adjustment mode
deviation	and carry out the operations
	for adjustment item N.
	(Refer to page 33)
	Detector: +P HOLD
	HPF: OFF
	LPF: 3kHz
	De-emphasis: OFF
	TX power: Low
	1)LCD display: DVL,					Encoder	Write	0.8kHz ±50Hz
	Frequency: 144.000MHz					[MENU]
	PTT: ON
	2)LCD display: DVC,					Encoder	Write
	Frequency: 145.000MHz					[MENU]
	PTT: ON
	3)LCD display: DVH,					Encoder	Write
	Frequency: 145.990MHz					[MENU]
	PTT: ON

41