26
AUDIBLE USER FEEDBACK TONES

The transceiver emits various tones to indicate the

transceiver’s operating status:

•Power ON Tone: Sounds when you turn the transceiver
power ON.
•Key Operation Tone: Sounds when you activate a
function by pressing a key. Also sounds when you reach
the lowest channel while rotating the Channel selector.
•End of Operation Tone: Sounds when you deactivate a
function by pressing a key.
•Operation Error Tone: Sounds when you press a key that
has no function programmed and when you press a locked
key while Key Lock is enabled.
•Sequence Error Tone: Sounds when you select a
channel with the Channel selector, that is not programmed.
•Transmission Inhibit Tone: Sounds when you press the
PTT switch when it is illegal for you to transmit (when the
TOT expires, when there is no transmit frequency, etc.).
•TOT Warning Tone: Sounds before the TOT expires.
•Selective Call Alert Tone: Sounds when you receive an
Optional Signalling call that matches your pre-programmed
signalling code.