Orientation, Channel selector, LED indicator | Kenwood TK-3300

ORIENTATION

Antenna

Battery pack

Channel selector

Rotate to change the operating channel.

•To change the operating frequency or QT/DQT settings of a channel, refer to “CHANNEL SETUP MODE” on page 11.

•Channel Announcement: When changing channels, the transceiver will announce the newly selected channel number.

LED indicator

For the LED indicator status, refer to page 8.

Power switch/ Volume control

Turn clockwise to switch the transceiver ON. To switch the transceiver OFF, turn counterclockwise until a click sounds. Rotate to adjust the volume level.

PTT (Push to Talk) switch

Press and hold, then speak into the microphone to transmit.

Image 16

Kenwood TK-3300 Orientation, Channel selector, LED indicator, Power switch/ Volume control, PTT Push to Talk switch

Contents

TK-2300 Thank You FeaturesModels Covered by this Manual Operating Conditions Terminal Descriptions FCC License Information One or more of the following statements may be applicable Iii Precautions Page Information concerning the battery pack Do not disassemble or reconstruct battery Do not jar or throw the battery Vii Do not touch a ruptured and leaking battery Viii Contents Installing/ Removing the Battery Pack Preparation Installing the Antenna Installing the Belt Clip Installing the Optional Speaker/ Microphone or Headset Installing the Cover over the Speaker/ Microphone JacksInsert the speaker/ microphone Charging the Battery Pack LED indicator Power switch/ Volume controlPTT Push to Talk switch Orientation Side 2 key Side 1 keySpeaker/ microphone jacks Release the PTT switch to receive LED Indicator Status Indicator Color MeaningBasic Operations Rotate the Channel selector to select your Desired channel Press the PTT switch to save the setting Voice Operated Transmission VOX Time-Out Timer TOT Low Battery WarningBackground Operations Channel Announcement Channel Setup Mode TK-2300 K2 16 channel model TK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating Frequencies TK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setup QT Channel Settings DQT Channel Settings DQT Channel Confirmation Mode Release the PTT switch KEY Assignment Mode Table Number Press the PTT switch to save the setting Programmable Functions Scan + Temporary Delete Side 2 key default ScanScrambler Squelch Off Super Lock Side 1 key default Low Transmit Power Troubleshooting Guide Problem Solution Optional Accessories ALL Reset ModeRelease the keys