To change the functions of the Side 1 and Side 2 keys:
1With the transceiver power OFF, press and hold the Side 1 and Side 2 keys while turning the transceiver power ON.
•Continue to hold the Side 1 and Side 2 keys until the LED lights orange and the transceiver announces “Setup”.
2Continue to press and hold the key to be reprogrammed (either the Side 1 or Side 2 key), while releasing the remaining key.
•The transceiver will announce “Table zero”.
•If you continue to hold both keys, or if you release both keys, the operation will cancel in 5 seconds.
3Release the key.
4Press the Side 1 or Side 2 key to increment/ decrement the number, to select the new key function.
•Table numbers and their corresponding functions are provided in the table on page 20.
•A voice announcement will inform you of the currently selected Table number.
5Press the PTT switch to save the setting.
•A beep will sound and the transceiver will announce the new Table number.
6Turn the transceiver power OFF and then ON again to activate the new settings.
Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds.
21
