CHANNEL OPERATING FREQUENCIES
To change the operating frequency of a channel:
1With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON.
•Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces “Self”.
2Release the PTT switch and Side 1 key.
•The transceiver announces “Channel”.
•Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup.
3Press and release the PTT switch, then rotate the Channel selector to your desired channel.
•Upon pressing and releasing the PTT switch, a beep will sound and the transceiver announces “Table zero”.
4Press the Side 1 or Side 2 key to increment/ decrement the Table number, to select the new channel frequency.
•Press and hold the Side 1 or Side 2 key to increment/ decrement the number by 5 at a time.
•Table numbers and their corresponding operating frequencies are provided in the table on page 14.
•A voice announcement will inform you of the currently selected Table number.
5Press the PTT switch to save the setting.
•A beep will sound.
•Repeat steps 3 to 5 to set up another channel.
6Turn the transceiver power OFF and then ON again to activate the new settings.
Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds.
13
