BASIC OPERATIONS

1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON.

• A beep sounds.

2Rotate the Channel selector to select your

desired channel.

• When you receive an appropriate signal, you will hear audio from the speaker. Adjust the volume as necessary.

3To make a call, press and hold the PTT

switch, then speak into the microphone using your normal speaking voice.

• Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips.

4Release the PTT switch to receive.

Note: When the battery pack voltage becomes too low, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red.

LED Indicator Status

Indicator Color

Meaning

 

Lights red

Transmitting

 

 

 

 

 

 

 

 

 

 

 

 

Lights green

Receiving a call

 

 

 

 

 

 

 

 

 

 

 

 

Blinks red

Battery power is low while transmitting

 

 

 

 

 

 

 

 

 

 

 

 

Blinks green

Scanning

 

 

 

 

 

 

 

 

 

 

 

 

Blinks red/orange

The selected channel has not been

 

programmed and cannot be used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 18
Image 18
Kenwood TK-3300, TK-2300 instruction manual Basic Operations, Rotate the Channel selector to select your Desired channel