50
MEMORY FEATURES

MEMORY CHANNELS

The transceiver provides you with 100 memory
channels, numbered 00 to 99, for storing operating
frequency data, modes and other information.
Memory channels 00 to 89 are called Conventional
Memory Channels. Memory channels 90 to 99 are
designed for programming VFO tuning ranges and
scan ranges. The data you can store is listed below.
Conventional memory channels are used for storing
data you will often recall. For example, you may
store the frequency where you regularly meet your
club members.
retemaraP lennahC
98~00
lennahC
99~09
ycneuqerfXRseY seY
1
)xelpmis(
ycneuqerfXTseY
edomXRseY seY
1
)xelpmis(
edomXTseY
OFVelbammargorP seicneuqerfdnE/tratS oNseY
ezispetsycneuqerfXRseY seY )xelpmis(
ezispetsycneuqerfXTseY
ycneuqerfenoTseYseY
ycneuqerfSSCTCseYseY
FFO/NOSSCTC/enoT sutats seYseY
emanyromeMseYseY
tuokcoLlennahCyromeM FFO/NO seY
1
seY
1
1Changing the data after recalling a memory channel overwrites the
contents of the channel.

STORING DATA IN MEMORY

There are 2 methods used for storing transmission/
reception frequencies and associated data in memory
channels 00 to 89. Use either method, depending on
the relationship of the reception and transmission
frequencies you store:
•Simplex channels:
RX frequency = TX frequency
•Split-frequency channels:
RX frequency ≠ TX frequency
Memory channels 90 to 99 can also be used as
simplex channels.
Note:
When RIT or XIT is ON, the frequency that includes the RIT or
XIT offset will be stored.
■Simplex Channels
1Press [A/B / M/V] to select VFO A or VFO B.
•“tA” or “tB” appears to show which VFO
is selected.
2Select the frequency, mode, etc. to be stored.
3Press [QMI/ M.IN] (1 s) to enter Memory Scroll
mode.
•“M.SCR” appears.
•To exit Memory Scroll mode and abort the
storage process, press [MTR/ CLR].
4Turn the MULTI control, or press Mic [UP]/
[DWN] to select a memory channel.
•You can also select a channel by entering a
2-digit number, such as 12, using the
numeric keys. Press [1], [2] for example.
5Press [QMI/ M.IN] again to store the data.
•The previous data stored in the channel is
overwritten.