53
11 MEMORY FEATURES
98~00lennahC a99~09lennahC
ycneuqerfXR aycneuqerfXR/XT )xelpmis(
ycneuqerfXT a
XRrofedoM aXR/XTrofedoM )xelpmis(
XTrofedoM a
petsycneuqerfXR aycneuqerfXR/XT )xelpmis(pets
petsycneuqerfXT a
ycneuqerfenoT aycneuqerfenoT
ycneuqerfSSCTC aycneuqerfSSCTC
SSCTC/enoT sutatsFFO/NO aSSCTC/enoT sutatsFFO/NO
emaNyromeM aemaNyromeM
lennahCyromeM FFO/NOtuokcoL alennahCyromeM FFOtuokcoL
99~09lennahC a98~00lennahC
ycneuqerfXR/XT aycneuqerfXR
aycneuqerfXT
XR/XTrofedoM aXRrofedoM
aXTrofedoM
ycneuqerfXR/XT )xelpmis(pets
apetsycneuqerfXR
apetsycneuqerfXT
ycneuqerfenoT aycneuqerfenoT
ycneuqerfSSCTC aycneuqerfSSCTC
SSCTC/enoT sutatsFFO/NO aSSCTC/enoT sutatsFFO/NO
emaNyromeM aemaNyromeM
lennahCyromeM FFO/NOtuokcoL alennahCyromeM FFOtuokcoL
When copying a memory channel 90 ~ 99 a
channel 90 ~ 99, Memory Channel Lockout status
changes to OFF, regardless of the original channel
settings.
The tables above illustrate how data is transferred
between memory channels.
STORING FREQUENCY RANGES
Memory channels 90 to 99 allow you to store
frequency ranges for VFO tuning and Program Scan.
Program Scan is described in the next chapter. To
tune or scan frequencies within a specified range,
store the start and end frequencies for that range in
advance.
1Press [A/B / M/V] to select VFO A or VFO B.
2Select the desired start frequency.
3Press [QMI/ M.IN] (1 s) to enter Memory Scroll
mode.
•To exit Memory Scroll mode and abort the
storage process, press [MTR/ CLR].
4Turn the MULTI control, or press Mic [UP]/ [DWN]
to select a memory channel in the range of 90 to
99.
•You can also select a channel by entering a
2-digit number. Press [9], [0] for example.
5Press [QMI/ M.IN] to store the start frequency in
the memory channel.
•“ENDINPUT” appears on the sub-display.
6Turn the Tuning control or MULTI control to select
the end frequency.
7Press [QMI/ M.IN] to store the end frequency in
the memory channel.
•The previous data stored in the channel is
overwritten.
■Confirming Start/ End Frequencies
Use this procedure to check the start and end
frequencies that you stored in channels 90 to 99.
1Press [A/B / M/V] (1 s) to enter Memory Recall
mode.
2Turn the MULTI control, or press Mic [UP]/
[DWN] to select a memory channel from 90 to
99.
3Press [] to check the start frequency and [ ]
to check the end frequency.