64
13 OPERATOR CONVENIENCES
MICROPHONE PF KEYS
When using the optional MC-47 microphone with the
MJ-88 plug adaptor, you can customize the functions
of the Microphone PF1 (CALL), PF2 (VFO), PF3
(MR), and PF4 (PF) keys. You can assign the
following types of functions to these keys via Menu
Nos. 49 ~ 52:
•Directly select a Menu No. without pressing
[MENU/ F.LOCK] and turning the MULTI control.
•Activate the same function as one of the Remote
Control panel keys.
One of the following functions can be assigned to
each PF key. Selecting “99” assigns no function to
the PF key.
PF KEY
You can program the Remote Control panel [PF] key
to assign a function that you frequently use. The
default is VOICE1 for the optional Voice Guide and
Storage unit, VGS-1 {page 68}. You can assign one
of the functions in “MICROPHONE PF KEYS” {above}
to this PF key, accessing Menu No. 48.
rebmuN noitcnuF rebmuN noitcnuF
06~0
06~00.oNuneM
08NI.M
161ECIOV18T.WC
262ECIOV281HC
36rotinoMXR382HC
46 XRPSD rotinoM 483HC
56kcoL.qerF58ENIF
66)XT(dneS68RLC
76enutXT78RTM
86BSUBSL88zHM
96WCKSF982/1TNA
07MFMA09BN
17TES-FT19RN
27RMQ29CB
37IMQ39LND
47TILPS49–
57B/A59–
67V/M69–
77B=A79–
87NACS89–
97M
s
OFV99noitcnufoN
RX DSP EQUALIZER

EQUALIZING RECEIVING AUDIO

Use Menu No. 18 to change the receiver frequency
responses of the target signal. You can select one
from 8 different receiver profiles including the default
flat response. Selecting any of the following items
from the Menu causes “R
tt
tt
t
EQ” to appear on the
display.
•Off (oFF):
The flat frequency response (default).
•High boost 1 (hb1):
Emphasizes higher audio frequencies.
•High boost 2 (hb2):
Emphasizes higher audio frequencies but lower
audio frequency attenuation is less than High
boost1 (hb1).
•Formant pass (FP):
Improves clarity by suppressing audio frequencies
outside the normal voice frequency range.
•Bass boost 1 (bb1):
Emphasizes lower audio frequencies.
•Bass boost 2 (bb2):
Emphasizes lower audio frequencies but higher
audio frequency attenuation is less than Bass
boost1 (bb1).
•Conventional (c):
Attenuates 2 kHz or more audio frequency slightly.
•User (U):
Reserved for the ARCP software. Off (flat) is
programmed at the factory as a default.
RX MONITOR
RX monitor disables the squelch function temporarily
to monitor the current frequency activities.
To use the RX Monitor function, first assign the
function to the PF key on the Remote Control panel
(or Mic PF keys).
1Press [MENU/ F.LOCK] and turn the MULTI
control to select Menu No. 48.
2Press [ ]/ [ ] to select “63”.
3Press [MENU/ F.LOCK] to store the setting and
exit the Menu mode.
4Press [PF].
•While [PF] is pressed, the speaker unmutes.