TRANSVERTER (TV-5021

To connect the transverter t o TS-820. proceed as follows:

1. Check that the power to the transverter and TS-820 is

OFF.

2. Connect the cable supplied with the transverter t o the X

. -

VERTER connector of TS-820 and the CONTROL con-

 

 

nector of the transverter ( 2 m CONTROL connector for

 

TV-502).

3.Connect the supplied pin-cords to the X VERTER OUT jack of TS-820 and the TX IN jack of the transverter ( 2 m TX I N jack for TV-502).

4.Connect the supplied earth cable between the GND ter- mlnais of TS-820 and the Transverter. This connection is necesarry because it prevents electrical shocks and

provides stabilized operation.

5Turn on the transverter switch on the rear panel of T S ~ 8 2 0 .The SG switch may be left in the ON position. Changeover between HF and VHF is automatically ac- complished by the POWER switch of the transverter. Be sure to turn off the transverter switch when the transverter is not connected. TS-820 requires no modi- fication for transverter operation.

6.Connect the antenna to the ANT terminal on the rear of

the transverter (144 MHz for TV-502).

7. Check to see that the POWER switch and the standby switch of TS-820 are set to OFF and REC respectively. Also. check that the POWER switch of the transverter is set to OFF. Then connect the power cords to AC outlet (or DC power source for DC operation).

CONNECTION OF VFO-820 (See Fig. 291

Connect VFO-820 as shown in Fig 29. This connection ma- kes your transceiver operation more enjoyable. After con- nection. keep the 9-P M T plug removed from the EXT VFO connector of TS-820 in a proper place so that it is not lose. Connecting cord is supplied with VFO-820.

By manipulating the function switch of VFO-820. you can operate TS-820 as if you are using 2 sets of transmitters and receivers. To calibrate the VFO frequency of TS-820 and that of VFO-820. proceed as follows:

1Set TS-820 in the receive mode and then set the

FUNCTION switch to CAL-RMT position.

2.The FUNCTION switch of ~ ~ 0 . 8 2 may0 be set in any position

3.Tune the frequencies of TS-820 and VFO-820 so that a beat is generated. When they are tuned for zero beat. the frequencies of both units are perfectly calibrated. For operation of VFO-820. refer to the instruction ma- nual of VFO-820.

Page 35 Page 37
Page 36
Image 36
Kenwood TS-820 manual Transverter TV-5021, Off
Page 35 Page 37

TS-820 specifications

The Kenwood TS-820 is a high-performance amateur radio transceiver known for its exceptional features and technologies that cater to both novice and experienced operators. This rig, part of Kenwood's renowned TS series, has become a popular choice for those seeking reliability and versatility in their communication equipment.

One of the defining characteristics of the TS-820 is its dual-conversion superheterodyne receiver architecture. This design minimizes interference and provides improved performance across various amateur radio bands. With coverage from 160 meters to 10 meters, the TS-820 is capable of operating on all major HF amateur bands, making it an excellent choice for diverse communication purposes.

In terms of power, the TS-820 delivers a solid output of 100 watts, ensuring that operators can make their presence known across the airwaves. The rig features a built-in automatic antenna tuner, which simplifies the setup process by matching the transmitter to various antenna types. This feature not only enhances signal clarity but also maximizes the station's efficiency.

Another standout feature of the TS-820 is its extensive digital signal processing (DSP) capabilities. The advanced filtering options help to eliminate noise and interference, allowing users to hear weaker signals more clearly and effectively. The IF filter selections can be adjusted to optimize reception under varying conditions, showcasing the rig's adaptability.

The user interface of the TS-820 is designed for both ease of use and functionality. The large, backlit display provides critical information at a glance, while the rotary controls offer tactile feedback, allowing operators to make precise adjustments quickly. Additionally, the rig supports various modes of operation, including SSB, CW, and RTTY, accommodating a wide range of communication preferences.

Built with durability in mind, the TS-820 utilizes high-quality components and construction techniques that ensure long-term reliability. Its rugged design can withstand the rigors of everyday use, making it a trustworthy companion for any amateur radio enthusiast.

In summary, the Kenwood TS-820 is a versatile and reliable amateur radio transceiver that stands out due to its superior performance, advanced technologies, and user-friendly features. With its robust design and comprehensive capabilities, the TS-820 continues to earn its place as a respected choice among ham radio operators around the world. Whether engaged in casual conversation or competitive contesting, enthusiasts can rely on the TS-820 for a satisfying and immersive amateur radio experience.
Top Page Image Contents