System Q
Selecting the best sound setting preset for different types of music.
1Select the source to set Press the [SRC] button.
2Select the Sound type Press the [Q] button.When you press the button once, the current sound setting is displayed.
Each time you press the button, the sound setting alternates.
Sound setting | Display |
User memory* | "USER" |
Rock | "ROCK" |
Pops | "POPS" |
Easy | "EASY" |
Top 40 | "TOP 40" |
Jazz | "JAZZ" |
Natural | "NATURAL" |
•* User memory: The values set on the <Audio Control> (page 11).
•Change each setting value with the <Speaker Setting> (page 13).
First, select the speaker type with the Speaker setting.
Audio Control
1Select the source to adjust Press the [SRC] button.
2Enter Audio Control mode Press the [VOL] knob.3Select the Basic Audio item to adjust Press the [VOL] knob.Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Basic Audio item Turn the [VOL] knob.Adjustment Item | Display | Range |
Rear Volume *1,2 | 0 — 35 | |
Subwoofer level*1,3,4 | "SW L" | |
Bass level*5 | "BAS L" | |
Middle level*5 | "MID L" | |
Treble level*5 | "TRE L" | |
Balance | "BAL" | Left 15 — Right 15 |
Fader*4 | "FAD" | Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
•*1 Function of the
•*2 You can control this item when "2ZON" of <Audio Setup> (page 12) is set to "ON".
•*3 You can control this item when <Subwoofer Output> (page 13) is set to "SW ON".
•*4 You can control this item when "2ZON" of <Audio Setup> (page 12) is set to "OFF".
•*5 You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control>(Page12). (Function of the
•*5 Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included :
Press a button other than the [VOL] knob and [ATT] button.
English 11