Precautions

•To prevent inductive phenomena causing humming or distortion, the speaker cables should not be run together with electrical energy conductors, microphone cables, or line-level audio lines.

•Use speaker cables that have markings to distinguish the polarity, such as insulation or conductors of different colors.

•Before using the loudspeaker, carefully check that all the connections have been made correctly to make sure there are no accidental short circuits that could cause electrical sparks.

•Verify that the polarity of the connections to all of your loudspeakers are correct. When more than one loudspeaker reproduces the same frequencies, but with opposite polarity, there will be sound cancellations. Therefore, if any of the loudspeakers are wired so that the +/- connection polarity is reversed with respect to the others, incorrect reproduction will result. Most notably, the bass response will suffer. This is especially true when loudspeakers are situated in adjacent positions where the sound waves readily interact with each other.

VR61 and VR62 – 9

Page 8 Page 10
Page 9
Image 9
Kenwood VR62, VR61 instruction manual Precautions
Page 8 Page 10

VR62, VR61 specifications

The Kenwood VR61 and VR62 are leading-edge home theater receivers that provide an immersive audio experience, catering to both casual listeners and serious audiophiles. These models are designed for modern entertainment setups, delivering high-quality sound and a multitude of features that enhance any home theater environment.

One of the primary characteristics of the Kenwood VR61 and VR62 is their powerful amplification system. Each model is equipped with multi-channel amplification, allowing users to drive multiple speakers without compromising on audio quality. This results in clear, dynamic sound that can fill a room, making them an ideal choice for both movies and music.

In terms of connectivity, both receivers offer a range of options. They include multiple HDMI inputs and outputs, enabling easy connection to various devices like Blu-ray players, gaming consoles, and streaming devices. This extensive connectivity is essential for users who wish to integrate different components into their home entertainment setup seamlessly.

The VR61 and VR62 are also equipped with advanced audio processing technologies. They support various surround sound formats, such as Dolby Atmos and DTS:X, which provide an enveloping three-dimensional audio experience. These technologies allow users to experience sound as if they were in the middle of the action, enhancing immersion during movies and video games.

Another notable feature is the user-friendly interface, which simplifies navigation through settings and options. Users can easily adjust sound settings, switch between input sources, and calibrate their listening environment with minimal hassle. The receivers are also compatible with smartphone apps, allowing for remote control and easy access to streaming services.

Energy efficiency is another characteristic that makes the Kenwood VR61 and VR62 appealing. Both models are designed to consume less power while delivering high performance, making them environmentally friendly choices for eco-conscious consumers.

In summary, the Kenwood VR61 and VR62 offer an exceptional combination of power, connectivity, and advanced audio processing. With their ability to deliver a high-quality sound experience, user-friendly features, and energy-efficient design, these receivers are excellent choices for anyone looking to enhance their home theater setup. Whether for casual viewing or serious audio enjoyment, the VR61 and VR62 are poised to meet a wide range of entertainment needs.
Top Page Image Contents