Kenwood DP-SE9, R-SE9T, X-SE9 44Clock adjustment, A M, A M, A M, 8 :4, 8 :) ), 1 2 :) ), 2Enter the hour, 3Enter the minute, Ensure that the power is OFF, “enter”, “enter”, the figure

44Clock adjustment

This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function.

Ensure that the power is OFF.

section	1Activate the clock adjustment mode.
Preparation	auto/mono

section	2Enter the hour.
	1	multi control
Basic
	To decrease		To increase
	the figure		the figure
Application section	2	enter
	3Enter the minute.
	1	multi control
sections	To decrease		To increase
Knowledge	the figure		the figure
	2	enter

R-SE9T/DP-SE9/X-SE9 (En)

Example: Adjustment to 8:45

R-SE9T

A M 1 2 :) )

÷The time display starts to blink.

R-SE9T

A M 8 :) )

÷The time of the day is represented in 12-hour AM/PM method.

÷Press the “enter” key. The hour is entered and the minute display starts to blink.

R-SE9T

A M 8 :4 5

÷If you make a mistake, restart from the beginning.

÷To adjust correct time, press the “enter” key at the same moment as a time announcement.

÷The time display blinks after a power failure or when the power cord has been unplugged from the AC outlet and plugged again. In such a case, adjust the clock again.