Kenwood DP-SE9, R-SE9T, X-SE9 Timer programming, 4Select a program No, 2Adjust the listening volume, 1Make preparations for the play (recording), enter, 1 band, R-SE9T, cording.•

46	Adjust the clock before setting the timer.	Timer operation
		R-SE9T/DP-SE9/X-SE9 (En)

Timer programming

This is a 24 hour timer.

Select the time and duration for the operation and the contents, and select operation or no operation as required.

Adjust the clock before setting the timer.

Preparation section

Basic section

1Make preparations for the play (recording).

÷ To listen to radio ÷ To listen to CD ÷ To listen to tape ÷ Listening to MD ÷ For recording

The station should	Insert a disc.		Set a tape into deck. Set a disc into the		............................	Make prepa-
be preset prior to	(Program playback	................................................................	................................................................	MD recorder.		rations for re-
the above. ¶ is not possible.)						cording.•
						(Steps 1 to 4)
				For recording and playback with an MD
				recorder (DM-SE9), also refer to the instruc-
				tion manual enclosed with the DM-SE9.
................................................................

2Adjust the listening volume.

volume control

÷ For recording of broadcasts, muting becomes ON automatically when the power is switched on by the timer.

Application section

Knowledge sections

3Set the on/standby switch to standby position.

on/standby

4Select a program No.1 bandDuring display of program content

2

enter

÷The “PROG.” indicator lights.

÷When a timer reservation already has been made, the contents will change to the new settings.

R-SE9T

1 ) :) ) PROG.