24 | Let's put out some sound |
| |
|
|
|
When tapes are set in the decks A and B and the reverse mode is set to “
” (play of both sides), play of the second deck will be started automatically after play of the first deck has been completed. Tape play will be repeated alternately.
÷Relay play is not possible in the reverse modes “
” and “
”.
÷If a tape is loaded only in either deck, playback stops after having played both sides of the tape.
AA
Basic section
The tape counter is set to “0000” when a cassette tape is loaded. By writing down the counter reading in case you want to interrupt recording (playback) in the middle of the tape, the memo will be helpful as a reference for locating the same position when continuing the recording (playback) the next time. The tape counter figure decrements during recording or playback of the back side (while the 2tape transport indicator is lit).
To set the tape counter to “0000”, open the cassette holder once. Then the counter will be reset.
T A P E | 0 000 |