Handling of discs and tapes
7
| Handling |
| Hold the discs so that you do not touch |
| the playing surface. |
| Label side |
| Playing side |
Sticker | Do not attach paper or tape to either |
| the playing side or the label side of the |
| discs. |
Sticky paste
CleaningIf fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner.
StorageWhen a disc is not to be played for a long period of time, remove it from the player and store it in its case.
CD (12 cm, 8 cm), and the audio part of CDV,
Use discs that comply with the IEC standard, for example
a disc carrying themarking on the label surface.
Never play a cracked or warped discDuring playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they may cause a malfunction.
Disc accessoriesThe disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction.
section Preparation
Safety tab (accidental erasure prevention tab) | To store cassette tapes |
After an important recording has been finished, break the | Do not store the tapes in a place which is subject to |
safety tab, to prevent the recorded contents from being | direct sunlight, or near equipment that generates heat. |
erased or recorded on accidentally. | Keep the cassette tapes away from any magnetic field. |
For A side
For B side
N
S
When there is slack in the tapeIn such a case, insert a pencil into the reel hole and wind the reel hub to remove the slack.
To
Notes Since longer tape than 110 minutes cassette tape is very thin, the tape could adhere to the pinch roller or be easily cut. It is recommended that these tapes not be used with this unit to prevent possible damage.
2.Endless tapesDo not use an endless tape, as this could damage the mechanism of the unit.