Manuals / Brands / Home Audio / Stereo System / Kenwood / Home Audio / Stereo System

Kenwood Power cord, Connection with other components(optional or commercially-availableequipment), Super woofer, Connection with other components, CAUTION

Models: XD-652 XD-702 XD-752 XD-772S XD-852

1 72

Download 72 pages, 2.13 Mb

System connection 11

XD-SERIES (EN/M,T)

Connection with other components(optional or commercially-available equipment)

CAUTION Note on Connection

Connect the components as shown in the diagram.Only plug the power cord into a power outlet once connections are completed. The rear panel configuration is variable depending on the models (countries or area).

MD recorder, DVD player, VCR or analog turntable

MD recorder/VCR

DVD player/analog turntable (P-110/optional)

Digital	Audio	Audio input
input	output	MD REC OUTPUT
		MD REC OUTPUT
		L
		R
		L
		R
		MD/DVD INPUT
Optical-fiber cable		DIGITAL OUT
		DIGITAL OUT
		OPTICAL

Audio output

÷If an external component such as a DVD player is connected to the MD/DVD INPUT jacks, the MD REC OUTPUT jacks do not output the audio of the external component.

section Preparation

Super woofer(XD-6...series, XD-8...series only)

Extremely low sound is played back powerfully.

(SW-500/optional)

+

-

	R	L
	SUPER	FRONT
	WOOFER
		SPEAKERS
	PRE OUT
		(6-16Ω)

Power cord

To wall AC outlet

DIGITAL OUT OPTICAL jack

Remove the cap and plug the optical-fiber cable.

Optical-fiber cable	DIGITAL OUT
	OPTICAL
(Provided with the MD	Cap
recorder)

÷Insert the optical-fiber cable straight into the connector until it clicks.

÷Be sure to attach the protection cap when the connector is not used.

÷Never band or bundle the optical-fiber cable.

In case an associated system component is connected, also read the instruction manual of the Note component.

Contents

COMPACT DIGITAL AUDIO TEXT 2Before applying power Safety precautions Contents IMPORTANT SAFEGUARDS Controls and indicators Basic section Let's put out some sound CAUTION POWER OFF 6Special features Demonstration System connection Accessories Connection of the system accessories System connection Speakers (XD-7...series) System Name Speaker Model Name XD-702 LS-N702 Speakers (XD-6...series, XD-8...series) XD-652 LS-N472 XD-852 LS-N572 How to use the speaker stabilizer (cushions) Connection with other components(optional or commercially-availableequipment) Power cord Surround (rear) speakers (XD-7...seriesonly) FM outdoor antenna 75Ω termimal In regard to the SURROUND switch Controls and indicators Display Main unit Receiver 1ON/STANDBY ) key 2STANDBY indicator TIMER indicator Remote control unit (XD-7...series) Remote control unit 18Operation of jog dials (XD-7...series) SOUND CONTROL jog dial Operation of jog dials 20Operation of remote control unit Handling of discs and tapes 22Let’s put out some sound Basic use method 1.Switching the power ON (OFF) 2.Selecting the desired output Reproducing sound with enhanced bass (EX. BASS) (XD-6...series, XD-8...seriesonly) Muting the sound temporarily (Super woofer) (XD-7...seriesonly) 1Select “Audio Options” Playback of CD 1. Load a disc 2.Start playback High-speedsearch in forward and reverse directions Playback of tape 1.Load a cassette tape 2.Select the deck to be used for playback & # ¡ 3. Start playback To wind tape at high speed Selection of reverse mode (Main unit only) (Main unit only) Each press switches the modes as follows 1 “ ” .... Playbackstops after having played Relay play A tip for use of the tape counter (XD-7...series XD-8...series only) During play in direction Receiving broadcast station 1.Select the broadcast band 3.Select a station Collective presetting of stations (auto preset) Keep the TUNING MODE key depressed (about 2 seconds) (Other countries) “One-by-one presetting (manual preset)” 32Let's record Recording on TAPE 2.Select the tape transport direction 3. Set the recording condition (Main unit only) (XD-7...series, XD-8...seriesonly) 5.Start recording Points in CD recording 1Put the CD player in pause mode 2Select the track to be recorded with the skip (4, ¢) keys (The CD player pauses at the beginning of Copying tape The contents of the tape in deck A can be copied onto the tape in deck B Load tapes in the decks 1Select the “TAPE” input 2Press the stop key 36Playback of CD Listening in the desired sequence (program playback) 4Check the programmed tracks (and replace, add or delete tracks as required) To check: To replace a track in the program: Playback of CD Repeated playback To repeat all discs To repeat only the programmed tracks 2Select the disc to be played first 3Select “All Repeat” 2Start playback Random playback To select another track in the middle of playing one R.D.S. (Radio Data System) (For U.K., Europe and Russia) This unit is equipped with the following functions utilizing RDS data: PTY (Program Type Identification) Search :w PS (Program Service Name) Display : (See below.) EON (Enhanced Other Network) : Searching for a desired program type (PTY search) R.D.S 1 Select the PTY search mode Select the desired program type Use program type table on the right for your convenience 3Start the search (Press the key again during search to cancel it.) “PTY” “NO PROG” To change to a different program type : To be able to listen to the desired information at any time (EON) Set the reception band to FM 1Auto preset the stations 1Receive a broadcast 2Keep the TUNING MODE key pressed (2 sec or longer) 4Wait for the desired information CD or tape playback may also be started As long as the unit is ON, the unit is always ready for the reception Waiting for information while a RDS station without EON function is tuned TP (Traffic Program) indicator 46Convenient CD recording Selection of the recording type In regard to CD-TEXT (Remote control unit only) Recording only desired titles (CD ONE TRACK RECORDING) Recording preparations are required. (Steps 1 to 3) Recording of an entire CD (CD DIRECT RECORDING) Recording the programmed titles (CD PROGRAM RECORDING) Recording preparations are required. (Steps 1 to 4) 50Effective sound adjustment Balance adjustment Input level adjustment Listening to music with desired tone and sound field Each press switches the modes as follows “Dolby Pro logic” “Dolby 3 stereo” “Dolby Virtual surround” “Effect off” (XD-6...series Play a video software program 2Select the desired equalizer pattern Creation and memorizing of an equalizer pattern You can edit desired patterns manually and store them in memory 2Select the number to be used for storage (Custom EQ1 ~ EQ3) 3Adjust the equalizer pattern Surround function Surround setting 4Select the delay time 5Adjust the volume balance 1 Press the MULTI CONTROL key while “Test C” or “Test S” is displayed 3After completing the volumes from all the speakers, press the SELECT key 6Press the ENTER key 58Clock adjustment Timer operation Sleep timer Operate easy To use Timer (O.T.T.) 1Select the desired source and adjust the volume 2Select “Clock Options” 3Select “O.T.T.” 4Select “O.T.T. on” Timer programming 4Select “Everyday” or “One Time” 5Enter the ON time 6Enter the OFF time “Timer off” (Canceled) “Everyday” “One Time” 7Make the desired reservation 1Select the mode Select “Play” or “AI Play” 1 “Play” ..... Timer play 2 “AIPlay” .. Timer play with 64Important Items Maintenance Reference In case of difficulty In case of difficulty No station can be received by preset call operation Demonstration starts sud Cassette deck Sound cannot be produced “Mainte by pressing the play key nance” CD player A CD is placed in the player but it cannot be played “Handling of discs and tapes” Remote control unit Remote control operation is not possible General No operation occurs when [ Amplifier section ] [ Tuner section ] [ Cassette deck section ] [ General ] 70 Specifications (XD-6...series, XD-8...series) Specifications [ CD player section ] Fronts speakers (LS-N472) (XD-6...series) Fronts speakers (LS-N572) (XD-8...series) Surround speaker system (CRS-N572) [ Surround speaker ] Bass-reflextype For your records