10

System connection

 

 

 

 

XD-SERIES (EN/M,T)

Connection of the surround speakers (XD-6...series,XD-8...series)

CAUTION Note on Connection

Connect the components as shown in the diagram.Only plug the power cord into a power outlet once connections are completed. The rear panel configuration is variable depending on the models (countries or area).

Before connecting the surround speakers system, be also sure to read “Surround function” and “Surround setting”.

TY

Preparation section

Surround speakers system (supplied)
Center speaker
Surround speaker

− +

Surround speaker

 

Recommended speaker installation

It is recommended that the surround speakers are installed straight to the left and right of the listening position or slightly behind, at a height of about 1 meter higher than the listener’s ears. Each surround speaker should be installed so that the longer sides are horizontal.

 

 

 

How to use the speaker stabilizer (cushions)

·

ª

 

When the surround speaker system installation is un-

 

 

 

 

 

 

stable due to the floor condition, apply the provided sta-

 

 

 

bilizer (cushions) on four positions on the bottom of

− +

 

− +

each speaker.

 

 

· ªSURROUND SPEAKERS (12-16Ω)

CENTER SPEAKER(6-16Ω)

- +

L

R

Main Unit

1 2 3

Twist

Speaker Unit

1 2 3

Twist

· ª

4

4

Hanging on a wall

The speakers can be hung on a wall by using the wall hanging holes on the back of the speaker.When hanging the speakers, select a rigid and hard place on the wall which can withstand the weight of the speakers.

1.Install a screw with sufficient strength on the wall. When screwing in, leave the head and upper stem of the screw projected by 7 to 9 mm from the wall surface.

2.Hang the speaker by inserting the screw into the wall

hanging hole on the upper rear side of the speaker. Check that the speaker are firmly mounted.

÷Before installation, check the wall or ceiling well to confirm that it is strong enough to withstand the weight of the speaker. KENWOOD cannot assume the responsibility against accidents caused by the drop of speaker due to insufficient mounting strength or to any defect in installation.

÷The wall hanging screw is not provided. Please prepare a screw that can assure enough mounting strength according to the material and thickness (structure) of the wall where the speaker is to be hung.

÷If the material or thickness of a wall or ceiling cannot be confirmed, consult a professional specialized in installation.